Blog

Camper Tie Downs are a critical component to your truck camper adventure. Without TRUE Frame Mounted Tie Downs, you are either compromising the truck bed or not using proper gear for your truck camper set-up. If you have made it to this blog, you are either learning about Torklift Tie Downs for the first time or are a lifetime customer with new camper tie downs for your truck. Either way, you have made it to the right spot.

TRUE Frame Mounted Tie Downs

Torklift Tie Downs are manufactured to mount to the frame of your truck compared to alternative brands that mount to the bed or bumper. By mounting to the frame, you are mounting to the strongest part of your truck and are making sure your truck camper will be sturdy for the long haul.

Torklift TRUE Frame Mounted Tie Downs are manufactured in Steel Tie Downs and Talon Stainless Steel Tie Downs. Depending on where you live, Talon Stainless Steel Tie Downs may be for you. Learn more about the Talon Tie Downs here.

How to install Torklift Truck Camper Tie Downs

Check your vehicle fitment

Before you can get started with installing your camper tie downs, you must determine what part number will fit your truck. Every Torklift Tie Down is manufactured to specifically fit to the frame of your truck without modification and due to this the fitment is very vehicle specific.

Make sure to use our Find Your Fit Guide located on our website to determine the part numbers that you need. If you need further assistance, our customer service and tech support team is available Monday-Friday 8:30 am – 5 pm PST at 800-246-8132.

When confirming your fit, you will also be shown additional products that are offered for your vehicle such as the Torklift Stableloads® which is a suspension upgrade. Make sure to take a look at all the fitment options for the optimal truck camper experience.

 Install your Torklift tie downs

Once you have determined the best fitment for your vehicle, ordered your tie downs, and received them in the mail or from a local dealer, it is now time to get them installed. Torklift manufactures their camper tie downs to be as DIY as possible to allow for little to no modifications and the ability to install at home if you choose. If you would prefer to have a certified installer install the products for you, you can locate a dealer near you at our where to buy section of our website.

If you have chosen to install the Torklift Tie Downs at the comfort of your home, the hardware, bolt kit and instructions are provided in your new tie down kit box. Once the receiver tubes are bolted on to the frame of your truck, the next step is to slide the tie down insert into the receiver tubes.

If you are needing more assistance, our team is happy to assist in talking you through the installation. We also have many installation videos that can be watched here. 

Pair the tie downs with Torklift Original FastGuns

The Torklift FastGun is the ultimate turnbuckle system and allows for the ability to easily disconnect the tie downs with ease when ready to remove your truck camper from your truck. An additional plus to this system is the ability to set the tension once and often not needing to set them again for your next trip.

Torklift also offers additional turnbuckle systems such as the Springload XL and Basic Springload. Head here to learn which turnbuckles are right for you. 

Have further Questions?

If you have further questions on truck camper tie downs and turnbuckles maintenance, our team is ready to take your call or answer your email. We are open Monday – Friday 8:30 am PST to 5 pm PST, excluding holidays. You can contact our team by calling 800-246-8132 or emailing support@torklift.com.

Looking for Torklift camper tie downs for sale? Find a dealer in your area or online!

Where to Buy

If you are new to truck camping and not sure where to start or what you need, keep reading to learn more about the products that you need to start your great truck camping experience.

To get started, you must think about the experience you are wanting. Are you looking to use your camper for multiple trips a year? Are you looking to tow behind your camper to bring your boat with you or horse trailer? There are many products available to make your travel experience more enjoyable.

TRUE Frame Mounted Camper Tie Downs

Torklift Camper Tie Downs attach to the frame of the truck at four points that are bolted directly to the truck frame. By attaching to the frame, you are attaching the truck camper to the strongest part of the truck which also prevents bed damage where alternative brands attach.

As the camper tie downs are attached to the truck frame and bolt-on installation, they are also very vehicle specific. To determine your fitment, click here. 

Torklift FastGun Turnbuckles

The Torklift Original FastGun is a quick-disconnect truck camper turnbuckle which allows ease of use when installing and removing. Each set-up also has tension indicators to determine the perfect tension of the system.

Not sure if you are interested in the FastGun turnbuckles quite yet? Torklift offers a basic springload kit and Springload XL. Learn more about the Good, Better, Best systems here. 

StableLoad® Suspension Stabilizer

When someone starts truck camping for the first time, they may not be aware of what adding weight to the bed of a truck can do to the ride. It often makes the ride uneasy, unstable, and uncomfortable. By adding the StableLoad® suspension system to your truck, you are able to combat the many common truck camper suspension items like sway, body roll, porpoising, and more.

With the Quick-Disconnect lower StableLoad® suspension upgrades installed, you are able to disengage the product when you do not have a heavy load in the back of your truck. This is crucial in allowing your truck to ride comfortably when not carrying the truck camper. Alternative suspension upgrades do not have this feature and due to that, the alternative products give a stiff ride.

Super Hitch® and SuperTruss

If you are someone that will be towing behind your truck camper, you will need an extension in order to reach your hitch on the truck. We recommend the Torklift Super Hitch® and SuperTruss combo.

The Super Hitch® is offered in three different fitments:

• Super Hitch® Hero 15K receiver – 15,000 lbs pull, 1,500 lbs tongue*
• Super Hitch® Original 20K receiver – 20,000 lbs pull, 2,000 lbs tongue*
• Super Hitch® Magnum 30K receiver – 30,000 lbs pull, 3,000 lbs tongue*

 *When used with weight distribution.

The Super Hitch® Magnum 30K receiver is the biggest and best when it comes to the Torklift Super Hitch® line.

SUPER HITCH® Magnum 30k Features

• SUPER HITCH® 30K frame mounted receiver rated up to 30,000 lbs pull and 3,000 lbs tongue weight with weight distribution (20,000 lbs pull and 2,500 lbs tongue weight carrying) in either the upper or lower receivers (When used without SuperTruss extension). Extension towing capacity up to 12,000 lbs. with 48” SUPER HITCH® SuperTruss receiver extension†
• SuperTruss Extensions available in 8 different lengths from 21” to 48” (Extensions available to 60") (Sold Separately)
• Both the SUPER HITCH® Magnum 30K frame mount receiver and the SuperTruss receiver extensions use Industry standard 2” x 2” ballmounts
• Eliminates the need for two ballmounts ††
• Specific Torklift tie down fits are available for the SUPER HITCH® Outlaw Series
• Legendary Lifetime Warranty
• Proudly made in the USA

 The SuperTruss is to be used in conjunction with the Super Hitch®. This is a product that is unable to be used on a different hitch system due to the dual receiver design for added security and stability.

Have further Questions?

If you have further questions on truck camper tie downs and turnbuckles maintenance, our team is ready to take your call or answer your email. We are open Monday – Friday 8:30 am PST to 5 pm PST, excluding holidays. You can contact our team by calling 800-246-8132 or emailing support@torklift.com.

Looking for Torklift camper tie downs for sale? Find a dealer in your area or online!

Where to Buy

Camper Tie Downs are a necessity when it comes to having a truck camper. When doing your research on what Tie Downs to use, you have inevitably fallen on to the Torklift website and learned about the TRUE Frame Mounted Tie Downs. One thing you may have not learned about as of yet is the Talon Tie Down option that Torklift Offers.

Talon Camper Tie Downs

The Talon Tie Downs are designed just like the Steel Tie Downs so that they bolt-on directly to your truck frame, the strongest part of your truck. Since the frame is the strongest part of the truck, you can avoid damaging your truck bed or bumper.

As they are frame mounted, they are not one size fits all. The camper tie downs are very vehicle specific. Find your fit here. 

Talon Camper Tie Downs Features

• Rust free corrosion protection for life†
• Dramatic improvement with vehicle handling and stability and is the safest way to haul a truck camper (Prevents vehicle sway and camper movement in all directions)
• Strength and safety for stress-free truck camper hauling and camping, and the best ride quality in the industry
• Mounts using independent tie down points that bolt directly to the truck frame
• Custom fit to specific truck makes and models to allow for the ultimate safety and confidence
• Applications for Talon tie downs including applications of best-selling Ford, Chevy and Dodge truck models
• Tie down receiver tube and tie down insert are each 100% military grade aluminum and stainless steel
• Fast, 100% no-drill installations
• No loss of ground clearance perfect for off-road truck camping
• Hidden when not in use to return your truck to its original look
• Finishing Kit included to protect tie downs from effects of road debris
• Lockable with Tie Down Locks

 Why you need Talon Camper Tie Downs

The Torklift Talon Tie Downs are made from military grade aluminum that is also lightweight. The camper tie downs are also rust free and have a corrosion protection to handle the toughest of climates and terrain. If you are dealing with harsh chemicals and salts on the road for the winter or on the coast taking your boat out into the water, this is the product for you.

The Talon Camper Tie Downs are backed by our Legendary Lifetime Warranty and made in the USA.

Have further Questions?

If you have further questions on truck camper tie downs and turnbuckles maintenance, our team is ready to take your call or answer your email. We are open Monday – Friday 8:30 am PST to 5 pm PST, excluding holidays. You can contact our team by calling 800-246-8132 or emailing support@torklift.com.

Looking for Torklift camper tie downs for sale? Find a dealer in your area or online!

Where to Buy

You’ve made the big decision to take your camping adventures off-grid: Congratulations! Getting set up for a truck camper and making the decision on which camper with your truck can seem tricky, but it doesn’t have to be! As long as you follow these few details, you’ll be set up and ready to get out and go in no time.

What came first: the truck or the camper?

One saying we hear frequently is “Don’t buy the carriage before the horse”. It is very important to evaluate the truck that you have or the truck that you plan on hauling your camper to be sure that it will stand up to needs of your camper. Nothing is worse than forking out the cash for a beautiful, luxurious truck camper just to find out that your truck can’t haul it. There are multiple factors you will want to take into account when checking compatibility of your truck and truck camper.

Payload

Above all, you will want to make certain that your Gross Vehicle Weight Rating (GVWR) is within limits and you have enough payload to support your camper. The GVWR is the maximum total safe weight on your vehicle. This weight is assigned by the Department of Transportation and can be found on the manufacturer sticker on the inside of your vehicle or in your owner’s manual.

To determine the amount of payload you available, go to a certified weight station to obtain vehicle weight, subtract this from your GVWR to identify how much payload capacity you have available for your truck camper. Tip: Don’t forget to take into account the weight of any cargo, for example, passengers, fuel, supplies, etc. If your rig is overloaded, you may have to take on the expense of changing campers or trucks.

Tie Down Compatibility

If you want to haul a truck camper, having truck camper tie downs and spring-loaded turnbuckles is a necessity. To attach your camper to your truck, we recommend our TRUE Frame-Mounted Camper Tie Downs. These camper tie downs are designed to bolt onto the strongest point of your truck: the frame. Since our parts are bolt on, part numbers are custom fit based on the year, make, and model of the vehicle. To verify fitment for the truck you have in mind, check your fitment here.

The Torklift TRUE Frame-Mounted Tie Downs must be paired with a spring-loaded turnbuckle. Take a look at our best-selling Original FastGun turnbuckle here.

Truck Design

Cab Size

Most truck campers are designed for extended or crew cab trucks. It is possible that a truck camper will fit on a regular cab, but there is a possibility that the cab over portion of the camper will limit visibility from a driver’s standpoint.

Four-Wheel Drive

Truck campers are designed to go anywhere at any time. With that being said, those who camp in truck campers typically will spend a lot of time off grid. If you plan on being off road, you need four-wheel drive to combat rough or rugged terrain that is common for truck campers.

To dually or not to dually

The choice of single rear wheel compared to dual rear wheel comes down to the fully-loaded wet weight of the truck camper. This would include the dry weight of the camper plus any additional cargo in the camper. Dual rear wheel trucks have a higher payload capacity due to the rear axle being wider so they can accommodate more weight than the single rear wheel trucks. 

If you have further questions about choosing the best truck for your truck camper set up, please give our support team a call at 800-246-8132 or email at support@torklift.com. Our tech support is available Monday – Friday from 8:30 am to 5 pm PST.

What makes these GlowStep Revolution® RV steps so customizable?

The GlowStep Revolution® truly is a custom RV step. It packs a punch when it comes to all the bells and whistles it has – that are kind of a secret. Most people do not know what this RV step is truly capable of.

Adjustability at the top of the step

No other RV step has the adjustability the GlowStep Revolution® is equipped with. You can customize the height of the step at the bottom and the top. It has this incredible gear mechanism at the top that allows you to choose from three levels of height from the entry of your RV to the top step of this system. Why does this matter? Well – when it comes to typical factory and aftermarket steps available – that top step is a doozy. Ever been walking along and suddenly you step off a sidewalk curb and nearly fall over because you were not anticipating the steep drop? That is exactly what it is like when exiting your RV because other RV steps available allow for an unexpectedly large drop from your RV to the top step. Our GlowStep Revolution allows you to widen or minimize the height at the top which is wonderful for folks struggling with mobility issues, tender knees and just gravity in general.

Adjustability at the bottom of the step

This custom RV step also has unending adjustment at the bottom of the step. This RV step features All Terrain Landing Gear – included with the kit! The All Terrain Landing Gear are pretty neat. If you were not wowed by the gear mechanism at the top of the step – buckle up buttercup, you are in for it now. Each side of the bottom step has its own independently operating landing gear to allow for perfection in being a stable and solid step.

When you park your RV when you go camping, the chances the ground is perfectly level is a bit low. So if you want your step to be level to the ground – assuming it reaches the ground – you have to take a lot of extra time parking and situating yourself on the most even part of the ground. With the GlowStep Revolution® you don’t have to worry about that task anymore. This RV step cares zero percent about where you park because let’s say you park on a slope and the ground is much much closer to one side of the step than the other. Easy peasy lemon squeezy – just use the push pin design to make one leg of the landing gear longer or shorter than the other one. Boom – custom RV step. You have five levels of adjustment on each leg to choose from.

Turn your RV step into a ladder

Alright – entering and exiting your RV never got more creative with the GlowStep Revolution®. Let’s say you stop at a rest stop (just think of any situation from RV storage to campsites where you have limited space – heck, even the side of your house). So after you come back from your brisk walk around the rest stop – oh no! Someone parked right next to your RV and now you can’t get inside because there is no room to deploy your step – and dang it – your RV features a step that stores in the door. Time to wait until further notice to get inside…

This scenario is never an issue with the GlowStep Revolution® – just turn it into a ladder

A final thought on making your RV step a custom RV step. If you ever find yourself in the situation above, all you have to do in order to deploy your step is to pull is straight down from its storage location and walk up it like a ladder. Check it out:

Badda bing badda boom.

For more info on the GlowStep Revolution go here    

To explore the GlowStep Revolution Uprising that stores in the doorway (without blocking your screen door) – go here 

Your love of the outdoors and need for adventuring off-grid has led you to buy a truck camper. Once your truck is equipped with the proper equipment – including the Torklift TRUE Frame-mounted tie downs – it is important to know how to safely load your truck camper. It is common for folks to leave their truck camper loaded on their vehicle during their camping trips. Keep in mind, unloading your truck camper at the campsite gives you an added layer of flexibility by letting you take your truck places where it is not necessarily convenient to bring your camper along.

If you are worried about the safety of your camper when it is off-loaded, check out the FastGun Wobble Stopper camper stabilizer. These will stabilize your camper when it is not loaded and secure it while you are away.

Since you need to reverse your truck into your camper, it will take some additional knowledge and attention to detail to be sure that your camper gets loaded with no damage to the truck camper or your vehicle. Follow these 3 simple steps to get your truck camper loaded up and on the road!

Step #1: Get prepped!

Before you get to loading your truck camper, you are going to want to make sure you have the appropriate preparation done so that loading goes as smoothly and as safely as possible! Follow these easy tips to make sure you are well-prepared to load your truck camper.

Make sure your bed is properly prepped and your parts are inspected.
We highly recommend adding a rubber bed mat to minimize the movement of the truck camper in the bed of the truck. Never install your truck camper on top of a plastic bed liner or hard surface spray-in bed liners. Installing your truck camper on top of a plastic liner can result in excessive vertical truck camper movement that can result in truck bed damage and/or camper damage.

• Make sure your bed is properly prepped and your parts are inspected. We highly recommend adding a rubber bed mat to minimize the movement of the truck camper in the bed of the truck. Never install your truck camper on top of a plastic bed liner or hard surface spray-in bed liners. Installing your truck camper on top of a plastic liner can result in excessive vertical truck camper movement that can result in truck bed damage and/or camper damage.
• Proper maintenance of your tie downs and turnbuckles is required to guarantee the life of your products. Before installing your truck camper, be sure your Torklift camper tie down inserts are pinned in place and your spring-loaded turnbuckles are properly tensioned.
• Phone a friend. Ask a buddy to keep an eye on the truck and camper from the rear. This will ensure that you have a second pair of eyes to guide you in loading your truck camper and deplete the risk of damage to your truck and camper set up.
• Use camper jacks to set camper to appropriate height. This may take some trial and error but setting your camper jacks to the right height will help you avoid scraping or scratching your truck camper set up.
• Engage your Torklift StableLoad Suspension. One of the great perks of being equipped with StableLoads is that you can engage or disengage them depending on if you have a load in the truck or not. Before loading your truck camper, be sure to engage the StableLoads to prepare for the additional load being added to the truck bed.

Step #2: Get loaded up!

Now we’re ready for the fun part – loading your truck camper! Now that your truck and camper are all prepped, it’s time to back your truck in and get your camper loaded. Here are some quick tips to help with getting the camper loaded in one shot!

• Store your camper on level ground. One of the most important tips to loading up your camper is to be conscious of storing your truck camper on level ground so that it is easier to load the camper back in once the time comes.
• Center your truck camper. Position yourself so that your truck is centered with the truck camper. Then all you have to do is back up in a straight line. This is the perfect time to utilize your spotter so you can make adjustments to your path as needed.
• Install the Torklift International Camper Bumper Kit. The Camper Bumper Kit fits all campers and is designed to establish a rubber barrier between your truck camper and the cab of your truck. This protects both your truck and camper from damage.

Step #3: Get going!

Once you have successfully loaded your truck camper into the bed of your truck, be sure to attach your truck camper anchor points to your Torklift TRUE Frame-mounted tie downs using a spring-loaded turnbuckle. We recommend our best-selling Original FastGuns that are equipped with a quick disconnect handle for ease of use.

Now that your truck camper is loaded and tied down, you are ready to hit the road!

If you have further questions about your Torklift tie down and turnbuckle set up or how to install, please contact us by phone at 800-246-8132 or by email at support@torklift.com. Our customer service team is available Monday – Friday from 8:30 am to 5 pm PST.

*For more details, call us at 800-246-8132.

In the market for a truck camper but not sure what you are getting yourself into? Already purchased a truck camper and not sure what to do next? To ensure the utmost safety of your vehicle, camper, and passengers, you will want to make sure you have the appropriate equipment required for hauling your truck camper. Torklift TRUE Frame Mounted Tie Downs are the only truck camper tie downs that bolt to the strongest point of your truck: the frame. Here are the four most important steps to installing your frame-mounted truck camper tie downs:

1. Check your fitment

The first step in getting your TRUE Frame Mounted Camper Tie Downs installed on your truck is to be sure you have appropriate parts for your vehicle. Each Torklift camper tie down kit is custom designed to perfectly fit the frame of your truck. With that being said, each truck camper tie down kit is extremely specific to the vehicles year, make, model, etc. Be sure to use our Find Your Fit Guide to locate the correct part numbers or give our tech support team a call at 800-246-8132 to confirm the fitment.

Once you confirm your fitment, you may be wondering which style of camper tie down will best suit your truck – the original steel or the aluminum Talon tie downs. The Talon camper tie downs are crafted out of high impact powder coated, lightweight military grade aluminum alloy and stainless steel. The Talon tie downs are designed to handle in the toughest climates and terrain. We highly recommend upgrading to Talon camper tie downs if you live or travel in areas with high levels of salt on the roads or if you tow a boat and offload it into salty water. Aside from our Legendary Lifetime Warranty, Torklift Talon Tie Downs also come with rust-free corrosion protection for life.*

2. Bolt on your tie downs

Once you have your correct fitment and have selected the style that would best suit your needs, it is time to install your truck camper tie downs. Torklift tie down kits feature DIY designs that are 100% no-drill because our engineers utilize factory pre-drilled holes that are already in your truck frame for ease of installation. Some modification may be required for vehicles older than 2001. Each TRUE Frame Mounted Tie Down kit comes with all the hardware needed for installation and includes detailed instructions that include a parts inventory and step-by-step instructions to guide you through the installation. Once the receiver tubes are bolted on to the frame of your truck, the tie down inserts slide in and you’re done!

3. Make sure you pair your TRUE Frame Mounted Tie Downs with spring-loaded turnbuckles

With Torklift TRUE Frame Mounted Tie Downs you will want to be sure to tie down your camper using spring-loaded turnbuckles. The use of a spring-loaded turnbuckle protects the truck camper anchor points and tie downs from damage as well as protects the cargo and passengers in the vehicle. We offer a variety of truck camper turnbuckles – check out our best selling Original FastGuns.

4. Keep your equipment safe

Once your Torklift camper tie downs and spring-loaded turnbuckles are installed, your truck camper is ready to go and you are ready to hit the road! The last thing you want to worry about on your off-grid adventures is the safety of your equipment. To deter thieves, makes sure to add Tie Down Locks and FastGun Locks to your truck camper set up.

If you have further questions about your Torklift tie down and turnbuckle set up or how to install, please contact us by phone at 800-246-8132 or by email at support@torklift.com. Our customer service team is available Monday – Friday from 8:30 am to 5 pm PST.

*For more details, call us at 800-246-8132.

There are generally two reasons someone gets a truck bed camper.
1.) So they can go horse camping or boat camping which means towing your horse trailer or boat trailer behind your camper
OR
2.) Wanting the ability to go off grid into anywhere – because there are just places you can’t go with a fifth wheel or other large towables

Where do you start?

Before you start looking into what products you need, you have a few things to consider. The main thing that needs to be looked at before you begin is what you are wanting to tow and the weight associated as well as what your truck is rated to tow and haul.

Can I increase the towing capacity on my truck?

No aftermarket products you purchase will be able to increase your truck’s towing ratings. Let us repeat: No aftermarket products will increase your towing capacity beyond what your truck’s original rating from the manufacturer is. Products that make that claim are hogwash. If possible, we recommend determining what you would like to tow before you purchase your truck and then purchase a truck capable of those towing needs OR learn what your truck can tow and match yourself with a trailer within those limits.

How do I figure out how much I can tow?

It is critical to know your GVWR or Gross Vehicle Weight Rating to be able to tow safely and within legal limits. This term describes the total weight carrying capacity of your truck. A common mistake is using the dry weight of your truck camper instead of the wet weight. The wet weight includes the weight of your truck camper once fully loaded (cargo, water, etc). These things can really add up so it is important to factor them in. There are many additional factors to determining what set-up you can use. Check out this great article by Truck Camper Magazine and Torklift that goes over factors that you need to consider before embarking on your truck camper or trailer adventure. 

Truck Camper Tie Downs and Turnbuckles selection

The first items you will need to ensure you have would be truck camper tie downs and turnbuckles to hold your truck camper to your truck. We recommend our TRUE Frame Mounted Tie Downs for any sized truck camper. This will ensure that you are connecting your camper to the strongest portion of your truck (the frame) rather than the bed or bumper which is a thin sheet of aluminum.

Next up is a good truck camper turnbuckle system. The camper tie down turnbuckles are the portion of your set-up that connect the truck camper anchor points to the tie downs. There are several different truck camper tie down turnbuckle systems that we offer which include Torklift Original FastGun Turnbuckles, Springload XL Turnbuckles, and Basic Springload Turnbuckles. Not sure which turnbuckle system would be best for you? Click here to learn more about the Good, Better, and Best turnbuckle systems and which is best for you. 

As you can see from this photo, the customer is using Torklift TRUE Frame Mounted Tie Downs and Torklift Original FastGun turnbuckles.

Truck camper trailer hitch

Now that you have your truck camper tie downs and turnbuckles selected, the next item that you will need is a truck camper hitch and a truck camper hitch extension that will safely tow the trailer that you are looking to tow.

Torklift offers the SuperHitch Outlaw Series which offers three different hitches with ranging capacities of 15,000 lbs to 30,000 lbs pull when coupled with weight distribution. These high weight capacities are critical in ensuring that you are safely towing your load. But what if we told you that a high weight rating that at least matches the tow capacity of your truck so that you are not limited by the hitch is only the second most important factor with towing capacities? The first most important factor is making sure your truck camper hitch has an appropriate tongue weight rating.

What is tongue weight?

Tongue weight is the pressure of items and weight seated at the front of what you are towing and often times – this area tends to get over loaded. When using the Torklift SuperHitch Magnum combined with weight distribution, 3,000 pounds tongue weight can be achieved. Again – never tow or haul beyond the limits rated by your truck manufacturer. Not using a truck camper trailer hitch with the correct tongue weight is the most common cause of hitch failure. You don’t want to go there – it is incredibly dangerous. Torklift hitches feature the highest tongue weights available when used with weight distribution.

Truck camper hitch extension

The SuperTruss Extension is a dual receiver extension and comes in eight lengths from 21” to 60”. It only works with the SuperHitch Towing Series trailer hitches featured on the truck above. As you can see, there are two stacked receivers. The purpose for this design is to allow for the SuperTruss Extension to fit into each receiver at the same time. The SuperTruss Extension is a dual truss system – the only dual truss system available – designed for safety. Single truss extensions have a tendency to flex, bow and break under pressure. You will want a truck camper hitch extension when your truck camper hangs over the rear of your truck bed because you will need to have a way to bridge the truck camper hitch to your trailer tongue and the extension is that bridge.

SuperTruss Features

• Spring-loaded design ensures a safe ride for your family and your truck camper
• Protect your truck frame and camper anchor points from damage
• Adjusts in minutes, built in spring tension indicators
• High strength forged steel
• Special oil tempered chrome silicon springs for maximum longevity
• Legendary Lifetime Warranty
• Proudly made in the USA

 Have further Questions?

If you have further questions on truck camper tie downs and turnbuckles maintenance, our team is ready to take your call or answer your email. We are open Monday – Friday 8:30 am PST to 5 pm PST, excluding holidays. You can contact our team by calling 800-246-8132 or emailing support@torklift.com.

Looking for Torklift camper tie downs for sale? Find a dealer in your area or online!

Where to Buy

When someone starts truck bed camping, a necessity is having gear that holds the camper to your truck: tie downs and turnbuckles. There are many options out there for camper tie down turnbuckles, but we will be highlighting the top 3 options for truck camper turnbuckles for your camper. Regardless of what you choose, you can’t go wrong!

Best: FastGun Turnbuckles

Are you looking for the best of the best?
Then you need to check out the Torklift FastGun system! The FastGun turnbuckle is a stainless steel quick disconnect turnbuckle so that no matter where you go, you can quickly remove your FastGun turnbuckles to offload your truck camper or maybe you just need to get access your gas tank with ease. They are also designed with two sizes so that no matter the tie down system you have (Torklift TRUE Frame Mounted Tie Down system or alternative brand bed mounted systems) the FastGun turnbuckles will work. A benefit to the FastGun turnbuckle is once you set your tension with the tension indicators you are done adjusting.

Original FastGun Features

• No. 1 selling patented quick disconnect truck camper turnbuckle in the world
• Recommended by Lance Campers, Northern Lite, Northstar Campers, Lance Owners of America, Arctic Fox, Northwood Manufacturing, BigFoot Campers, Travel Lite and more
• Original FastGun turnbuckles serve as the connection bridge between the truck camper tie down and the camper anchor point
• Connects and disconnects in seconds - Quick release handle allows for easy tool-free adjustment
• Adjust once and you’re done
• You will especially love the quick disconnect handle if your turnbuckle is near your gas cap
• Spring-loaded design ensures a safe ride for your family and your truck camper
• This spring loaded truck camper turnbuckle prevents your truck camper anchor points from ripping out due to the constant fatigue that happens during regular travel because it acts as a shock absorber
• Tension indicators determine proper tension to hold down truck camper while in use which prevents common wear and tear as well as ripped out anchor points
• Only turnbuckle with spring tension indicators to ensure the pull down strength is within range of ALL truck camper manufacturer’s requirements to avoid camper damage
• Composed of 100 percent aircraft grade aluminum and stainless steel featuring several different finishes to customize the look of your truck and camper
• This stainless steel and aircraft grade aluminum truck camper turnbuckle does not rust – no more rust stains on you or your vehicle and never deal with degrading, swelling and deforming of your truck camper turnbuckle ever again
• Available for frame-mounted or bed-mounted tie downs
• Lockable to secure your truck camper (locks sold separately)
• Legendary Lifetime Warranty
• Proudly made in the USA

Guess what? That’s not all! Not only do you have all these amazing features for your FastGun turnbuckles, you also have the option to choose between four different finishes so you can match your truck and camper. The color options include Snowstorm White, Revolver Grey, Polished Stainless Steel, and Chasm Black.

Better: Springload XL Turnbuckles

The next turnbuckle is the Springload XL Turnbuckle. This truck camper turnbuckle is only designed to be used with TRUE Frame Mounted Tie Downs. This product, like the FastGun turnbuckle, is a truck camper spring loaded turnbuckles system and has internal springs and spring tension indicators. A difference between the Springload XL and FastGun turnbuckles is the quick disconnect feature that allows you to easily remove your truck camper tie down turnbuckles system.

SpringLoad XL Features

• High impact powder coated stainless steel
• Reaching 35” to 45”
• Spring tension indicators
• Can be used with Derringer Handles
• Legendary Lifetime Warranty
• Proudly made in the USA

Good: Basic Springload Turnbuckles

Last but not least, is the Basic Springload turnbuckle. The kit includes two quicklinks, two spring-load canisters, two heavy duty steel turnbuckles, and chain.

Basic SpringLoad Features

• Spring-loaded design ensures a safe ride for your family and your truck camper
• Protect your truck frame and camper anchor points from damage
• Adjusts in minutes, built in spring tension indicators
• High strength forged steel
• Special oil tempered chrome silicon springs for maximum longevity
• Legendary Lifetime Warranty
• Proudly made in the USA

 Have further Questions?

If you have further questions on truck camper tie downs and turnbuckles maintenance, our team is ready to take your call or answer your email. We are open Monday – Friday 8:30 am PST to 5 pm PST, excluding holidays. You can contact our team by calling 800-246-8132 or emailing support@torklift.com.

Looking for Torklift camper tie downs for sale? Find a dealer in your area or online!

Where to Buy

Are you looking for a new camping adventure? Truck camping is the perfect way to get off the grid and get to places you’d never be able to make it to in a travel trailer. As a new truck camper, you may be wondering where to start. First thing is first, you will need to know how to set up a truck camper.

Make sure you have the right equipment

The most important thing to think about when tying down your camper trailer is the equipment you will need. The essentials that you will need are camper tie downs and spring-loaded turnbuckles.

Truck Camper Tie Downs

Your camper tie down is going to be the anchor for your turnbuckles to attach to and secure your truck camper. The Torklift TRUE frame-mounted™ camper tie down system bolts directly to the strongest point of your truck: the frame. Frame-mounted tie downs dramatically improve vehicle stability and are the safest way to haul a truck camper due to the reduction in sway and excess camper movement. Plus, the Torklift camper tie downs are specific to the year, make, and model of the truck – ensuring for customized fit. To find your personalized truck camper tie down fitment, visit our Find Your Fit page.  

FastGun Truck Camper Turnbuckles

Your other essential piece of equipment to ensure the safe hauling of your truck camper is your spring-loaded turnbuckle. Turnbuckles serve as the bridge between your truck camper tie down and your camper anchor point. Why does spring-loaded matter? Being set up with spring-loaded turnbuckles ensures the safety of your passengers as well as the integrity of your truck and camper. The internal spring mechanism of the turnbuckle acts as a shock absorber and protects your truck camper anchor points. Each style of Torklift turnbuckles is equipped with this spring-loaded mechanism to provide you with maximum security while hauling your truck camper.

Camper Anchor Repair and Relocation Kit

Okay so you didn’t take our advice on getting springloaded turnbuckles the first time you tried truck camper turnbuckles – if that was you, read on. This kit is designed for folks who accidentally ripped out their camper anchor point by not using a spring-loaded truck camper turnbuckle. This kit allows you to repair the anchor point (which is required for holding down your truck camper). It can also be used to re-locate a truck camper anchor point in case it is in the wrong spot. How could a truck camper anchor point be in the wrong spot? Here is an example – you bought a dually truck and the fenders stick out which lead to your fender coming into contact with your turnbuckle. Moving the anchor point allows you to situate the camper anchor point in an area to avoid that interference.

Put together your products

Once you have established the proper camper tie down fitment for your vehicle, all you have to do is install! The good news about the Torklift TRUE frame-mounted™ camper tie downs is they are 100% no-drill designs for all trucks after 2001, making them as DIY friendly as possible. Got a truck older than 2001? No problem, we’ve got an application for that but some modification could be needed. Every part number comes with detailed instructions to assist you every step of the way through install. If you need additional assistance on how to install truck camper tie downs, our tech support team is available Monday – Friday, 8:30 am – 5 pm PST by phone, email, or Facetime.

Depending on which Torklift turnbuckle kit you choose to go with, assembly may vary. Not to worry, each turnbuckle kit also comes with detailed instructions and we have Youtube videos for reference available for each kit! (see below)

Basic SpringLoad Kit 

SpringLoad XL Kit 

FastGun Kit Assembly 

FastGun Kit Installation 

Once you have your truck camper tie downs installed and your spring-loaded turnbuckles assembled and tensioned to 300 ft/lbs, you are ready to get your truck camper on the road!

Aftercare

Getting your Torklift camper tie downs and spring-loaded turnbuckles assembled and installed is the majority of the work. You are going to want to invest some time into the maintenance of your products to be sure they last as long as possible. Here are 3 tips to maintaining your camper tie downs:

1. Clean them regularly. To avoid any excess debris or surface rust, we recommend cleaning up your truck camper tie downs and turnbuckles any time you’d wash your vehicle.
2. Use a rust inhibitor. To further combat surface rust, use a rust inhibitor after washing. A commonly used one is Rust-O-Leum.
3. Use the Tie Down Finishing Kit. When tie downs are not in use, remove inserts and use our capping kit to protect tie downs from additional environmental damage. 

If you have any further questions about how to tie down your truck camper, please give our customer service team a phone call at 800-246-8132 or by emailing us at support@torklift.com. If you would like to locate a dealer in your area, please visit our dealer portal. 

You’ve just invested a hefty amount of money on your truck camper, and now you are thinking “Where do I go from here?”. Well, the answer is simple! You want to make sure that you have all the appropriate equipment to haul your truck camper safely. To secure your truck camper to your truck, you will need an appropriate tie down and turnbuckle system.

What is a truck camper turnbuckle?

Your truck camper turnbuckle is going to be the connection bridge between your camper anchor points and your Torklift camper tie downs. Turnbuckles are a necessary piece of equipment within a truck camper and tie down system to ensure the safe travel of your camper and passengers.

What does it mean to be spring-loaded?

A turnbuckle is considered spring-loaded when it is equipped with an internal spring mechanism that allows for slight movement when placed under impact.

3 reasons you want your turnbuckles to be spring-loaded

1. Safety first!

Your truck camper turnbuckles are a very important piece of equipment that are a part of your Torklift truck camper tie down system. Each style of Torklift turnbuckle is equipped with an internal spring-loaded mechanism, when this spring-loaded mechanism is tensioned properly and engaged, it acts as a shock absorber to make the overall ride of your truck camper more smooth and comfortable. This also ensures the safety of your cargo and passengers.

2. Ensures that there is no damage to the vehicle and truck camper

Since the spring-loaded mechanism of the turnbuckle acts as a shock absorber, a spring -loaded turnbuckle would take on any impact that may be experienced during a rough ride – in turn, the use of spring-loaded turnbuckles also protects the anchor points on your truck camper and the attachments on your truck camper tie downs as well. The last thing you want to deal with on your camper is the costly task of repairing or replacing your truck camper anchor points. With that being said, the shock absorption from the spring-loaded camper turnbuckles ensures the preservation or your true frame-mounted tie downs. In fact, as long as you are using any of our fully spring-loaded turnbuckles with our frame-mounted camper tie downs, we warranty the truck frame and camper anchor points for the extent of the camper manufacturer warranty.

3. If you have frame-mounted tie downs

As long as you are using TRUE Frame-Mounted Tie Downs, you are going to need spring-loaded turnbuckles to guarantee the safest set up. In the case that your truck is equipped with bed-mounted camper tie downs, you would want to opt for the Torklift AnchorGuard Derringer turnbuckles or the FastGun .45 Turnbuckles. The Torklift AnchorGuard turnbuckles are equipped with two spring-loaded turnbuckles for your front mounts and two cushioned turnbuckles for the rear mounts.

If you are interested in getting set up with a set of our spring-loaded turnbuckles or would like to talk further about which design would be best for you, please give our customer service team a phone call at 800-246-8132 or by emailing us at support@torklift.com. If you would like to locate a dealer in your area, please visit our dealer portal here.

Looking for the perfect way to get off the grid and go camping, but still able to camp in an RV? Truck Bed Camping is the perfect way to hit the road and go camping and allows you to go in further off the beaten path. There are many truck camping options out there, but the starter pack would include the truck, truck camper and equipment to tie the camper to the truck.

Torklift Camper Tie Downs

Truck Camper Tie Downs are a necessity to securely attach a truck camper to a truck. There are two options in truck camper tie downs for vehicles older than 2017 which include Torklift Frame-Mounted Tie Downs and the alternative option of bed mounted tie downs. (Torklift makes truck camper tie downs for 2017 plus as well). By going with frame mounted tie downs, you are attaching to the frame of the truck as opposed to attaching to the aluminum body of a truck or bumper which often can cause damage to your pickup truck. Torklift frame mounted tie downs are manufactured to fit specific trucks and truck frames and due to this are sold in a set of two for front Torklift camper tie downs and a set of two for Torklift rear camper tie downs.

How to maintain the life of Torklift Tie Downs

Although products manufactured by Torklift International come with a Legendary Lifetime Warranty, finish is something that is not under warranty due to the camper tie downs being exposed to the natural elements that can cause corrosion when steel is exposed. If you are interested in corrosion resistant truck camper tie downs, click here to determine if the Torklift Talon Tie Downs upgrade are for you.

There are two steps to maintaining your Steel Camper Tie Downs which include:

1) Regularly inspect and clean your tie downs. As previously mentioned, your vehicles are exposed to elements that may cause corrosion to steel such as road salts, salt water, etc. By inspecting your camper tie downs regularly and cleaning off any chemicals your truck may have come into contact with while driving on the roads, you are able to prevent the potential of rust. If you are dip the rear of your truck into salt water while off-loading your boat for a fishing trip, you will absolutely want to hose down the underbody to prevent rust from all aftermarket steel products installed on your truck.

2) If you do begin to see rust due to exposed steel, touch up the Torklift Tie Downs with an enamel or urethane-based aerosol paint products such as Rust-Oleum.

Like any great product, some maintenance may be required even if that just means wiping them down after your camping trip.

How to maintain the life of Torklift Fastgun

Torklift Fastgun Turnbuckles are what you would use to attach the truck camper to the frame mounted camper tie downs. This springloaded system for truck camper turnbuckles allows you to set tension of the turnbuckle system once – that’s right, once, and with the easy quick release handle, you are able to remove the tie downs easily at the end of each trip or when you want to remove your truck camper.

Just like the camper tie downs, you will want to maintain the truck camper turnbuckles as well. An easy way to clean off the turnbuckles and to avoid the possibility of corrosion, is to use a WD-40 and microfiber towel or cloth to wipe them down. If you are looking to polish the Fastgun turnbuckles, specifically the polished stainless steel Fastguns, we recommend using a stainless steel chrome or aluminum wheel polish.

Another way to maintain the life of the product is to add a level of security. The Torklift Fastgun locks are a great addition to your camper tie down system and allow for added security while you are on your camping trip.

Have further Questions?

If you have further questions on truck camper tie downs and turnbuckles maintenance, our team is ready to take your call or answer your email. We are open Monday – Friday 8:30 am PST to 5 pm PST, excluding holidays. You can contact our team by calling 800-246-8132 or emailing support@torklift.com.

Looking for Torklift camper tie downs for sale? Find a dealer in your area or online!

If you're heading to the 2020 Florida RV SuperShow, get ready to win big! If you attend the show, you're getting a chance to learn more about the GlowStep Revolution and GlowStep Revolution Uprising step systems to see what everyone's been buzzing about, as well as a chance to win a set of RV steps!

Florida RV SuperShow Info
Jan. 15-19, 2020
Located at: Florida State Fairgrounds
Wednesday - Saturday: 9am – 6pm
Sunday: 9am-5pm
RV SuperShow Website
Torklift Booth Locations: B213, B236

Win a FREE GlowStep Revolution!

At the RV SuperShow in Tampa, you'll see up close the high-quality step systems, made right here in America, that provide unparalleled stability and requires no heavy lifting to operate. With infinite adjustability from 48-inches to 6-inches (GlowStep Revolution) and 12-inches (GlowStep Revolution Uprising) ladder deployment, there’s no space that these RV steps can’t be extended and used in. The GlowStep Revolution Uprising steps are award winning trailer steps that feature a patent pending design that allows you to increase or reduce the number of steps with the flip of a lever. With 7-inches of vertical elevation adjustment, the GlowStep Revolution Series steps are easy on the knees and back and connect the RV to the ground eliminating the unsafe diving board effect and clunky booster steps.

But, why are we going into such detail about these Revolutionary steps? If you attend the Tampa RV Show from Jan. 15-19, 2020 you can visit the Torklift booths B213 and B236 to enter to win a FREE set of Torklift trailer steps to get your rig ready for Spring camping!

Don’t miss out on our discounts – available to Florida RV SuperShow attendees only!

*Limit one per customer. Must be at the 2020 Florida RV SuperShow to get coupon and redeem. Offer valid Jan. 15-19,2020. Cannot be combined with any other offer.

For more information about what we have going on at the Florida RV show, call us at 800-246-8132. We can’t wait to see you there!

Written by Kerstin Stokes:
As a graduate from the College of Idaho with a B.A. in both History and Art, Kerstin has found her passion for writing and marketing, and has loved every minute of working for Torklift for over 3 years. She enjoys looking up tasty recipes for baking and daydreaming about future travels.

Earlier this year, we announced our sponsorship of HILLSHOT HOOLIGAN Joel Crawford who is one of the founding members of the sand dune fanatic group. Hillshot Hooligans first began as a local group in Oregon state that has quickly grown to thousands of members across the country. With the same adventurous spirit as Torklift – so of course we had to go to DuneFest in celebration!

Show Info:
Location – Oregon Dunes Recreation Area, Booth E-3 in Vendor Row
Show Schedule –

Tuesday, June 23rd: 9 am – 7 pm
Wednesday, July 24th: 9 am – 7 pm
Thursday, July 25th: 9 am – 7 pm
Friday, July 26th: 9 am – 7 pm
Saturday, July 27th: 9 am – 7 pm

Raffles and free giveaways every day!
DuneFest starts on Tuesday but that’s just the tip of the “dune-burg.” Not only are we doing a daily raffle for Torklift products, including our brand new GlowStep Revolution Uprising RV steps, StableLoad suspension product and more – but we’re also giving away amazing Torklift and HILLSHOT HOOLIGAN swag Thurs. – Sat. If you stop by the booth at 4pm, HILLSHOT HOOLIGAN co-founder Joel Crawford and our team will be passing out the awesome items below while supplies last:

Thursday – FLAG giveaway at 4pm
Friday – LANYARD giveaway at 4pm
Saturday – WINDOW DECAL giveaway at 4pm

Discounts just for DuneFest Attendees!
Not only will we be having exciting giveaways and raffles every day at our vendor booth, but just for DuneFest attendees we have some great discounts. We’re offering 20% off ALL Torklift products, or 40% off if you’re wearing Hillshot Holligan gear so you can upgrade your RV steps and accessories, RV battery storage boxes, hitches, security products and much more! That includes our brand new products the GlowStep Revolution Uprising trailer steps, PowerArmor Lithium RV battery box, Cannon trailer hitch extension and much more! Also, if you come to the booth dressed in your DuneFest/Hillshot Hooligan swag, then you get and even bigger discount when you purchase at our booth!

Joel uses the following Torklift products on his Rubicon travel trailer for all of his off-roading and adventures with his family and friends: GlowStep Revolution RV steps, DirtDestroyer RV shoe cleaning attachment to prevent all that sand at the dunes from getting into the trailer, StableLoad suspension upgrade, PowerArmor RV battery box, Fortress GasLock and SuperHitch trailer hitch.

Don't miss our Hillshot Hooligan and DuneFest exclusive giveaways! 

To learn more about the Torklift International products Joel uses or to learn more about our DuneFest plans, visit our Contact Us page or give us a call at 800-246-8132.

Written by Kerstin Stokes:
As a graduate from the College of Idaho with a B.A. in both History and Art, Kerstin has found her passion for writing and marketing, and has loved every minute of working for Torklift for over 3 years. She enjoys looking up tasty recipes for baking and daydreaming about future travels.

This year Torklift welcomes Jiu Jitsu World Champion Ron Boutilier to our sponsorship program. A member of Olympia-based Hammerhead Mixed Martial Arts, Boutilier became a world champion competitor. In the Male Blue Master 1 heavyweight division, Boutilier took home the gold medal at the 2018 International Brazilian Jiu Jitsu Federation (IBJJF) World No-Gi Championships at the Anaheim Convention Center.

Boutilier, who started training in No-Gi Jiu Jitsu, which is a submission style of wrestling, in 2008 and later began studying traditional Brazilian Jiu Jitsu in 2014, claimed both his semifinal and finals matches with 2-0 victories, winning each match with a single takedown to capture the world championship.

Boutilier has competed in 41 tournaments, earning such titles as NAGA Washington State Expert champion, Lockflow Absolute champion, St. Croix Valley Absolute division champion, and Grappling Industries Washington State Absolute champion, but names his gold medal at the IBJJF world championships his biggest highlight so far.

He began training under Joey Guel at Hammerhead MMA a little less than one year ago. The gym, which opened in 2015, offers training and professional instruction in Brazilian Jiu Jitsu, Judo, and Muay Thai, among other styles.

Ron is one of the strongest competitors on the Jiu Jitsu circuit – which means he needs a trailer hitch that is the strongest in the industry. We geared him up with the SuperHitch Magnum 30K receiver hitch and the highest rated receiver extension in the industry, the SuperHitch SuperTruss.

When used with weight distribution, the SuperHitch Magnum 30K frame-mounted receiver hitch is rated at 30,000 pounds and can handle a tongue weight of up to 3,000 pounds.

As the highest capacity receiver extension in the industry, the SuperHitch SuperTruss:
      -  Is designed for campers up to 12 feet and available in eight lengths from 21-60 inches
      -  Has a dual truss for added strength
      -  Features hardened reinforced hitch pin locations
      -  Uses patented, lateral-support safety chains

If you’re interested in getting a hitch for your vehicle and want to do some heavy hauling, we have your back with the SuperHitch Magnum! You can purchase it from one of our Torklift Certified Dealers. Or, visit here for more details about this truck hitch and give us a call at 800-246-8132, we’d love to help you with your next hitch.

Written by Kerstin Stokes:
As a graduate from the College of Idaho with a B.A. in both History and Art, Kerstin has found her passion for writing and marketing, and has loved every minute of working for Torklift for over 3 years. She enjoys looking up tasty recipes for baking and daydreaming about future travels.

This year Torklift welcomes Hillshot Hooligan Joel Crawford to our sponsorship program.

Joel Crawford is a founding member of HillShot Hooligans – a vast group of sand-loving RV enthusiasts who go to any and all extremes to kick up sand with their side-by-sides and ATVS. Joel’s rig is outfitted to handle the rigors of sand dunes, dirt biking, ATVs and more. The Hillshot Hooligans first began as a local group in Oregon state that has quickly grown to thousands of members across the country. With the same adventurous spirit as Torklift – of course we had to sponsor not only a member, but a co-founder! 

Joel uses the following Torklift products on his Rubicon travel trailer for all of his off-roading and adventures with his family and friends: GlowStep Revolution RV steps, DirtDestroyer RV shoe cleaning attachment to prevent all that sand at the dunes from getting into the trailer, StableLoad suspension upgrade, PowerArmor RV battery box, Fortress GasLock and SuperHitch trailer hitch.

We are happy to help you Find Your Adventure and next big dune this summer Joel! See you at the dunes.

To learn more about the Torklift International products Joel uses on his truck and trailer, visit our Contact Us page or give us a call at 800-246-8132.

Written by Kerstin Stokes:
As a graduate from the College of Idaho with a B.A. in both History and Art, Kerstin has found her passion for writing and marketing, and has loved every minute of working for Torklift for over 3 years. She enjoys looking up tasty recipes for baking and daydreaming about future travels.

Torklift now offers a 30-day money back guarantee on ALL of our StableLoad suspension upgrades! We are so confident that you’ll love your StableLoads because of the thousands of customers we’ve received feedback from and no refunds, we offer a 30-day money back guarantee. If you decide they aren't the right fit for you and your truck, we will refund your product order up to your full purchase price – but we’re confident that once you try the StableLoad, you’ll never want to tow or haul without these suspension upgrades ever again. Just contact our team at 800-246-8132, or support@torklift.com, send us a photo of your receipt and we’ll work with you on a refund.

Your safety is key when it comes to the design of Torklift products. We aim to get you from point A to point B as safely and securely as possible, all while allowing you to bring along a toy hauler, boat trailer or truck camper. Any seasoned camping veteran will stress the importance and effectiveness of a StableLoad. This compact yet prominent piece of equipment helps ensure the safety of the items being hauled or towed, and more importantly, the passengers in the vehicle.

Manufacturers spent millions of dollars and over a hundred years investing in truck suspensions to ensure TWO major things: that it rides like a car and is comfortable, as well as its ability to safely tow or haul incredibly heavy loads. When a truck is loaded, the spring pack engages when you’re towing or hauling. On a truck without StableLoads, once you begin to tow or haul with your truck, pressure is applied too late on the factory overload stabilizer springs of your vehicle’s suspension. The problem is that there isn’t enough stability to support the load, resulting in poor handling characteristics. Here are just a few towing issues you may have experienced with no StableLoad installed:

• Side-to-Side Sway
• Body Roll
• Porpoising
• Truck Sag/Squat

The effects of hauling with and without the StableLoad are clear to see!

How are your towing issues handled with the StableLoad? By "pre-activating" the stabilizing effect designed for rear springs by keeping them actively under load the way your vehicle factory engineers designed them to operate. Unlike any other suspension upgrade, the StableLoad suspension stabilizers work with the factory suspension on your vehicle, allowing them to work the way they were designed to, improving safety, handling, sag, body roll, and porpoising while towing and hauling.

Upper and Lower Applications Available

The Torklift StableLoad comes in two application styles. The lower quick-disconnect StableLoad and the upper StableLoad. Designed to replace smaller, inefficient factory overload bump stop pads, the upper StableLoads engage the upper overload stabilizer spring rather than the lower overload stabilizer spring which is what the lower StableLoad is designed for. With both upper and lower StableLoads combined, they resolve all the issues that you would encounter when needing a suspension upgrade. The bonus with the lower StableLoad? It can be engaged and disengaged in seconds to return to your factory ride.

Focusing on innovation and boldly going where no one has gone before, Torklift has a mission of providing the highest product quality using high-tech machinery including lasers, WaterJets and robotics along with superior customer service. This is especially true when it comes to customer satisfaction and ensuring that you, the customer, is satisfied with our product. Avoid sway, sag and poor handling by installing Torklift upper and lower StableLoads on your vehicle. Visit Torklift’s Where to Buy page to find a local dealer near you. Or contact our tech support directly at 800-246-8132 for assistance with your orders or more information on our 30-day money back guarantee! With the StableLoad suspension enhancements installed, you will not only BE safer on the road, you will FEEL safer.

Written by Kerstin Stokes:
As a graduate from the College of Idaho with a B.A. in both History and Art, Kerstin has found her passion for writing and marketing, and has loved every minute of working for Torklift for over 3 years. She enjoys looking up tasty recipes for baking and daydreaming about future travels.

At Torklift, we are dedicated to producing the latest and greatest and our StableLoad suspension upgrade is no different! With our original design, our customers are able to feel the dramatic improvement at an affordable cost that the StableLoad provides to their truck suspension.

The StableLoad suspension enhancement manufactured out of stainless steel dramatically improves vehicle handling characteristics by "pre-activating" the stabilizing effect already designed into your rear springs by keeping them actively under load the way your vehicle factory engineers designed them to operate. It’s also the only suspension enhancement that you can turn on and off so you can return to your factory ride when not towing or hauling.

Now available in stainless steel, you have both the option of our original steel powder coated lower StableLoad as well as the NEW stainless steel version. The stainless steel StableLoad not only is non-corrosive but also enhances the look of your truck to make it stand out as the envy of other truck owners. What does that mean for you? This means that the stainless steel will keep the StableLoads looking new without a layer of protective powder coat and working great to meet and exceed the toughest demands from avid sportsmen and adventurers. These suspension upgrades are always ready to push the envelope with you while keeping your family, truck and whatever you’re hauling safe.

You may be asking why make the StableLoad also available in stainless steel along with our original steel design? Stainless steel is known to be an incredibly strong metal – so why not create a version of the StableLoad out of this durable metal as well? Similar to our rugged truck camper Talon Tie Downs that are made from both military grade aluminum and stainless steel, our new stainless steel StableLoads are built for tough conditions. Our engineers developed these ultra high performance suspension enhancements to handle the toughest climates and terrain. Whether you head out onto the coastal beaches or up to the mountain heights into the snow and ice where harsh chemical treatments are prevalent, nothing outperforms stainless steel StableLoads.

Manufacturers spent millions of dollars and over a hundred years investing in truck suspensions to ensure TWO major things: that it rides like a car and is comfortable, as well as its ability to safely tow or haul incredibly heavy loads. When a truck is loaded, the spring pack engages when you’re towing or hauling. On a truck without StableLoads, once you begin to tow or haul with your truck, pressure is applied too late on the factory overload stabilizer springs of your vehicle’s suspension. The problem is in this case, that there isn’t enough stability to support the load, resulting in poor handling characteristics. Here are just a few towing issues you may have experienced with no StableLoad installed:

• Side-to-Side Sway
• Body Roll
• Porpoising
• Truck Sag/Squat

Watch the video below to see how StableLoads stand up against other products like airbags, sway bars and more.

StableLoad Stainless Steel Features Include:

• Dramatically improves safety, handling, body roll and porpoising while towing and hauling
• Ability to turn on and off in seconds*
• Made of stainless steel to keep the StableLoads looking new without a layer of protective powder coat
• Universal fit for all vehicles with factory installed upper or lower overload stabilizer spring
• Quad contact design complements the vehicle’s specially engineered suspension that automotive manufacturers have invested millions of dollars designing, while all other rear suspension products reduce contact to only two points
• Quick no-drill installation**
• Enhances airbag performance by lowering airbag overload air pressure and activating the factory overloads
• Kit includes four StableLoads (outfits one complete vehicle)
• Legendary Lifetime Warranty includes coverage for the vehicle factory leaf springs
• Proudly made in the USA

* Applies only to the StableLoad Quick Disconnect (Lower Overload).
** Does not apply to the StableLoad Quick Disconnect (Lower Overload with Drill Kit).

Due to the dramatic improvement in overall handling characteristics from the StableLoad and its extremely low cost,* we recommend any suspension enhancement upgrades start with the StableLoad and that the vehicle operator evaluate as to whether any further upgrades are needed as often times the StableLoad suspension enhancement qualities are found to be more than enough improvement and no further costly suspension equipment may be required.**

The stainless steel StableLoads install to your lower overload leaf springs

* When compared to other suspension upgrade products, the StableLoad costs up to 50% less.
** Further upgrading or product additions for vehicle suspension is the responsibility and made solely at the discretion of the vehicle owner/operator.

Torklift also provides a 30-day money back guarantee on the StableLoads no matter where they were purchased. If you are not satisfied with your product in the first 30 days, with a receipt a full refund will be given. This is in place to ensure you are happy with your purchase.

For more information on the stainless steel StableLoads or to find your fitment today, click the button below or give our tech support a call at 800-246-8132. They are more than happy to assist you with questions you may have about these new corrosion resistant suspension upgrades. To complete your purchase with a certified dealer near you.

Written by Kerstin Stokes:
As a graduate from the College of Idaho with a B.A. in both History and Art, Kerstin has found her passion for writing and marketing, and has loved every minute of working for Torklift for over 3 years. She enjoys looking up tasty recipes for baking and daydreaming about future travels.

When it comes to safely towing with an extension while using the Ford factory hitch, there is only ONE extension that can do it safely without you having to upgrade and remove the factory hitch for a different hitch: the patented Cannon extension from Torklift!

The major reason why you need the Cannon hitch extension, especially if you want to tow with your Ford Super Duty, is that it’s the only one made specifically for the 2017-2019 Ford Super Duty 3-inch factory hitch that enables you to safely tow with a trailer hitch extension.

1.) It’s the ONLY extension made specifically for the 2017-2019 Ford 3” factory receiver

But, if you’re wanting to tow with a truck camper in your truck bed, or want some separation between your truck and trailer, then what can you do? Luckily, Torklift has your back and has made a towing extension specifically for the Ford 3-inch factory receivers. This towing extension system allows you the ability of hauling anything in the bed that’s going to hang over the rear of your truck, and still making use of the factory hitch receiver. Thanks to the Cannon hitch receiver extension, you can bring along anything you want such as a trailer, boat, side-by-side, ATV or even horses on your next family adventure.

When you’re towing and there’s excessive movement, it could lead not only to the need to replace parts prematurely due to unusual wear and tear, but also lead to potentially major accidents that leave you and your loved ones stranded on the side of the road or in a ditch. We’ve ensured that you won’t have to deal with this excessive movement and slop from having to use a reducer sleeve for the extension to fit. We’ve designed the Cannon specifically to insert into the 3-inch receiver so when you’re towing down the road, you don’t have to deal with unsafe towing conditions caused by up and down and side-to-side movement that is typical and dramatically multiplied when a reducer sleeve is required.

2.) The Cannon is made with SAFETY in mind using our patented design

Torklift is focused on safety, and that especially includes our towing equipment. The patented Cannon extension utilizes our original SuperTruss lateral support safety chains to prevent the extension from moving side-to-side while towing. This hitch extension also includes an ALL NEW dual set bolt system that prevents extension and receiver movement while towing.

The Cannon extension is also part of the hitch lines available from Torklift that are the ONLY ones in the industry that have hardened reinforced hitch pin locations. The reinforcement prevents what is hole elongation, commonly referred to as "egging" at the pin site. This leads to excessive movement in your trailer such as when your truck stops, and your trailer keeps moving dangerously. Once the hitch pin locations egg out, the hitch is damaged and can not only lead to trailer hitch component failure, but could also put you, your loved ones and others on the road in dangerous and deadly situations. You don't have to worry about this with Torklift hitches at your back!

An additional safety feature offered by the Cannon extension is our unique design that is on the underside of the extension. Essentially how it works is that once the Cannon is slid into the hitch receiver, there is a dual set bolt system at the end of the extension that slides under factory receiver. Once fully inserted, you can tighten the bolts on the wear plate that’s provided to press the bolts up against the factory receiver. This locks the extension and prevents it from moving vertically while traveling to ensure safety and handling.

3.) Comes in multiple lengths for towing behind your truck with a camper

The Cannon extension is available in 36-inch, 42-inch and 48-inch lengths. The Cannon is the perfect companion for all your towing needs.

E1636 Weight Carry:

• 3600 lbs maximum pull weight
• 360 lbs maximum tongue weight

E1636 Weight Distribution:

• 7200 lbs maximum pull weight
• 720 lbs maximum tongue weight.

E1642 Weight Carry:

• 3300 lbs maximum pull weight
• 330 lbs maximum tongue weight 

E1642 Weight Distribution:

• 6600 lbs maximum pull weight
• 660 lbs maximum tongue weight

E1648 Weight Carry:

• 3000 lbs maximum pull weight
• 300 lbs maximum tongue weight

E1648 Weight Distribution:

• 6000 lbs maximum pull weight
• 600 lbs maximum tongue weight

4.) Cannon SkidWheel Accessory Available

Whether you head out onto the coastal beaches or up to the mountain heights into the snow and ice where harsh chemical treatments are prevalent, nothing outperforms the stainless steel and rust free Cannon SkidWheel. Installed on the underside of the extension near the end of the Cannon where the lateral safety chains are attached, the SkidWheel protects your extension from dragging along the ground while you are towing. This is especially true when entering and exiting driveways with an incline and reduces the chance of damaging your towing equipment investments.

How does the Cannon SkidWheel work? It allows the SkidWheel to make contact with the ground before the extension receiver when towing heavy loads and a long extension, that way your towing equipment never reaches the ground. Because the Cannon SkidWheel roller is made out of stainless steel, we’ve ensured it can handle the toughest road conditions without rusting.

Features of the Cannon Extension include:

• Available in three lengths from 36” to 48”
• Internally reinforced
• Hardened reinforced hitch pin locations
• Uses patented, lateral-support safety chains
• Compatible with 2” and 2-1/2” ball mounts
• Includes safety chains
• Legendary Lifetime Warranty
• Proudly made in the USA

*Weight ratings dependent on length of extension.

Our goal at Torklift International is to provide our customers with safe equipment that speaks for itself when it comes to performance. Go big with Torklift Cannon hitch extension for your Ford factory 3-inch receiver for all your towing and hauling needs!

Learn more about our Cannon Ford hitch extension and Cannon SkidWheel and give our tech support a call at 800-246-8132, or purchase them at a Certified Dealer near you!

Written by Kerstin Stokes:
As a graduate from the College of Idaho with a B.A. in both History and Art, Kerstin has found her passion for writing and marketing, and has loved every minute of working for Torklift for over 3 years. She enjoys looking up tasty recipes for baking and daydreaming about future travels.

Today’s the big day – you’re taking the steps to getting your truck ready for the new truck camper you just purchased. Now you’ll be able to go camping in the great outdoors without having to worry about sleeping on the hard ground or critters getting into your “tent.” With a truck camper – you get the luxuries of home while also still getting to camp in remote places.

But – do you have your camper set up? Is your truck camper mounted onto your truck? You have your tie downs installed and you have your FastGun turnbuckles, but have you checked to make sure the FastGuns are properly tensioned? Read below to learn more about our patented O-Ring technology that ensures you have the proper tension for hauling your truck camper every time!

Spring-Loaded and what that means to you!
The Torklift FastGuns are spring-loaded. What does that mean? In order to prevent damage to the anchor points on your camper, these truck camper turnbuckles allow some give when your vehicle encounters uneven road conditions. We strongly recommend using spring-loaded turnbuckles on all four points of the camper because the spring design acts as a shock absorber. This protects the tie down system and camper anchor points from damage.

What is an O-Ring?
This O-ring is what we call the “spring tension indicator” because that is exactly its function. It indicates the amount of tension in the spring within the turnbuckle, allowing you to gauge how many pounds of tension is securing your camper.

Truck camper manufacturers recommend 300 pounds of pressure be applied on all four points to properly hold a truck camper to a truck. The spring-loaded function is crucial because it allows some give while driving on rough and bumpy roads.

How to adjust the FastGun O-Ring
Now that you know what the O-Ring is and the importance of ensuring that it’s tensioned to the correct pressure, below are four easy steps to see if you have the O-Ring installed correctly on your FastGun turnbuckle: 

1. Adjust turnbuckles into place
2. Align the O-ring to the bottom of the turnbuckle body (right up against the bottom of the FastGun body)
3. Snap down the quick-disconnect handle of the FastGun (you will feel the spring tension)
4. If the O-ring lowers by ¼ -inch, you’ve achieved the correct amount of turnbuckle tension

Example of how quickly you can install the FastGun on your camper

There you have it! Now that you have the O-Ring ¼-inch away from the FastGun body, your turnbuckles are tensioned properly at 300 pounds of pressure. You are ready to hit the open road with your camper. If you read this blog to learn more about the FastGuns but don’t currently own your own set – don’t fret! You can learn more about our truck camper turnbuckles and give our tech support a call at 800-246-8132 or purchase them at a Certified Dealer near you!

Written by Kerstin Stokes:
As a graduate from the College of Idaho with a B.A. in both History and Art, Kerstin has found her passion for writing and marketing, and has loved every minute of working for Torklift for over 3 years. She enjoys looking up tasty recipes for baking and daydreaming about future travels.