Innovation
Torklift.com | SuperTruss

SuperTruss® Receiver Extension for use with
SuperHitch™ or SuperHitch Magnum™
An unbeatable twin beam SuperTruss receiver extension system creates the highest rating in the industry!

Also check out our handy guide to proper Weight Distribution System Setup and Use



SUPERTRUSS EXTENSIONS
   
CAPACITIES
DEAD WEIGHT RATING
 CAPACITIES
WEIGHT DISTRIBUTING (REQUIRED)
Part # LENGTH GTW(F1) / GVW(F2) GTW(F1) /  GVW(F2)
Click Here for Part Numbers  21" 750 / 7,500 1,400 / 14,000
Click Here for Part Numbers  24" 750 / 7,500 1,400 / 14,000
Click Here for Part Numbers  28" 750 / 7,500 1,200 / 12,000
Click Here for Part Numbers  32" 650 / 6,500 1,200 / 12,000
Click Here for Part Numbers  36" 650 / 6,500 1,200 / 12,000
Click Here for Part Numbers  42" 600 / 6,000 1,200 / 12,000
Click Here for Part Numbers  48" 600 / 6,000 1,200 / 12,000
Click Here for Part Numbers  60" 500 / 5,000 1,000 / 10,000
F1 - TRAILERS TOTAL TONGUE WEIGHT WHEN FULLY LOADED
F2 - TRAILERS TOTAL WEIGHT WHEN FULLY LOADED
Consult owners manual for specific vehicle towing capacity

(WARNING: The higher capacities are obtained only with the use of the load equalizing hitch. Exceeding these dead weight capacities, without using a load equalizing hitch, may result in damage to the hitch or your vehicle.
Caution: Weight Distributing Hitch Is Mandatory On Larger Trailers!


If you don't know the length of SuperTruss you need, click here and use our measurement guide.


SuperTruss SkidWheel
Torklift also offers the universal SuperTruss SkidWheel

Click Here for Part Numbers


Lifetime Guarantee

Extension towing capacity up to 12,000 lbs. with 48” SuperTruss receiver extension.*

SuperTruss Extensions avail- able in 8 different lengths from 21” to 60”. (Sold Separately)

Designed for up to 12’ campers.

Industry Exclusive, Patented Lateral support safety chain assemblies.

Both the SuperHitch frame mount receiver and the SuperTruss receiver extensions use Industry standard 2” x 2” ball mounts.

Eliminates the need for two ball mounts **

Pre-drilled for TorkLift Camper Tie Downs

*12,000 lb. pulling capacity, 1,200 tongue wt. achieved only when used with weight distribution type system. See Dealer for details, Weight carring capacity on 48” extension, 5,000 lb. pull, 500 lb. tongue wt. Consult your vehicle owners manual for specific towing capacity. Your truck and trailer weight cannot exceed your vechile manufacturers towing, cargo, or GCVWR.

**(Camper on, camper off, hight variance) obtained by using the ball mount in either upper or lower SuperHitch receiver.



© 2005 TorkLift International Incorporated. All rights reserved.

Valid CSS!