2015 Chevrolet/GMC 3500 Single Rear Wheel (SRW) Crew Cab 4X2 & 4X4 Gas or Diesel 8'
Towing
Towing / SuperHitch Outlaw Towing Series.
Your Hitch:
Factory OEM Hitch
Upgrade Available*
SuperHitch Original 20K - C1211
*Caution: Your rear tie downs will change with your hitch application.
Upgrade Available*
SuperHitch Magnum 30K - C1211-30
*Caution: Your rear tie downs will change with your hitch application.
North Hitch Front Hitch - X7906
MFG Part Number: X7906Holes to drill: 0
Footnotes:
- Rated to 1000 lbs Tongue Weight and 10,000 lbs Trailer Weight.
- Chevrolet Only
Tie Downs and Turnbuckles
*Actual Tie Downs will vary
Front Tie Downs
Turnbuckles
Now that you know what Tie downs will fit your truck and camper, you can choose from our popular Springloading Turnbuckles. (You must select from one of our Springloaded Turnbuckles to maintain your Torklift camper anchor warranty.)
Tie Down and FastGun Locks
Suspension
StableLoad - A7200
MFG Part Number: A7200Holes to drill: 0
Footnotes:
- The A7200/A7202 is a NO DRILL APPLICATION and must have a factory installed upper overload.
-Will not work in conjunction with SuperSprings.
-Due to factory overload engagement design, some applications have progressive engagement, where rear springs will contact first.
-Drilling of rubber pad on some older Dodge applications may be required. Depending on the vehicle model, suspension package and condition, actual distance between the StableLoad and vehicle frame overload contact bracket may vary. In some rare instances, when the vehicle is not carrying a load, the StableLoad may come into contact due to rough road conditions and other anomalies. -(A7201 Spacer kit) is available for vehicles that need additional spacing for the StableLoad to contact the overload spring.
StableLoad - A7310S
MFG Part Number: A7310SHoles to drill: 0
Footnotes:
- StableLoad is a no drill application and requires factory pre-drill springs.
- All lower leaf spring mounted StableLoads: Due to truck manufacture design, wear and tear and after time, some vehicle leaf springs may have minimal clearance with the lower overload for StableLoad engagement and disengagement when the vehicle is unloaded. Must be conventional steel leaf springs. In order for the StableLoad to engage and disengage with minimal effort, a minimum gap of 1/8. To engage or. dis-engage weight may need to be take off springs if multiple wedges are used.
StableLoad - C7642
MFG Part Number: C7642Holes to drill: 0
Footnotes:
- All lower leaf spring mounted StableLoads: Due to truck manufacture design, wear and tear and after time, some vehicle leaf springs may have minimal clearance with the lower overload for StableLoad engagement and disengagement when the vehicle is unloaded. Must be conventional steel leaf springs. In order for the StableLoad to engage and disengage with minimal effort, a minimum gap of 1/8. To engage or. dis-engage weight may need to be take off springs if multiple wedges are used.
Auxiliary Battery Storage