Support: (844) 369-93582020 Dodge/Ram 3500 Single or dual rear wheel Crew Cab 4X2 & 4X4 Diesel Engine 8'
Towing
Towing / SuperHitch Outlaw Towing Series.
Your Hitch:
Factory OEM Hitch
Upgrade Available*
SuperHitch Magnum 30K - D1111-30
*Caution: Your rear tie downs will change with your hitch application.
North Hitch Front Hitch - x7910
MFG Part Number: x7910Holes to drill: 0
Footnotes:
- Rated to 1000 lbs Tongue Weight and 10,000 lbs Trailer Weight.
- Includes license plate relocation bracket
- 10,000 lbs Line Pull
- Does not fit Rebel Trim
Tie Downs and Turnbuckles
*Actual Tie Downs will vary
Front Tie Downs
Front Steel Standard Tie Downs - D2140
MFG Part Number: D2140Holes to drill: 0
Footnotes:
- Dually applications may require the use of (#A7004 Dually Adapter Kit) Measure from front of camper slide in point to the rear anchor point. If total is 90" or less, use Dually Adapter Kit.
- This tie down will work on trucks without running boards, or with the factory electric running boards that don't extend beyond cab.
- For trucks with stationary OEM running boards/STEPS THAT EXTEND BEYOND THE CAB EVEN A SHORT DISTANCE, USE D2142
Front Talon Aluminum Tie Downs - D2140A
MFG Part Number: D2140AHoles to drill: 0
Footnotes:
- Dually applications may require the use of (#A7004 Dually Adapter Kit) Measure from front of camper slide in point to the rear anchor point. If total is 90" or less, use Dually Adapter Kit.
- This tie down will work on trucks without running boards, or with the factory electric running boards
- For trucks with stationary OEM running boards/steps that extend even a short distance beyond the cab, use D2142 (Standard steel tie down)
Rear Steel Tie Downs - Factory Hitch - D3112
MFG Part Number: D3112Holes to drill: 0
Footnotes:
- Will not work with rear mounted kick out steps that are mounted under the bumper.
Rear Talon Aluminum Tie Downs - Factory Hitch - D3112A
MFG Part Number: D3112AHoles to drill: 0
Footnotes:
- Will not work with Mopar rear mounted kick out steps that are mounted under the bumper.
Turnbuckles
Now that you know what Tie downs will fit your truck and camper, you can choose from our popular Springloading Turnbuckles. (You must select from one of our Springloaded Turnbuckles to maintain your Torklift camper anchor warranty.)
Tie Down and FastGun Locks
Suspension
StableLoad - A7311
MFG Part Number: A7311Holes to drill: 4
Footnotes:
- All lower leaf spring mounted StableLoads (WITH DRILL KIT) will fit any passenger or commercial vehicle, van, SUV, truck, RV etc., with rear leaf springs and a lower overload spring. The lower overload leaf can be identified by being on the very bottom of the spring pack. It's thicker than the rest of the leaf springs in the spring pack usually has a gap between the lower overload leaf spring and the upper leaf spring pack.
-Drilling four 7/16 holes required. Specially treated drill bits and detailed drilling instructions are included.
-Average drill time is 30-40 minutes for complete installation
-Many factory overload springs come pre-drilled with 1/2 - All lower leaf spring mounted StableLoads: Due to truck manufacture design, wear and tear and after time, some vehicle leaf springs may have minimal clearance with the lower overload for StableLoad engagement and disengagement when the vehicle is unloaded. Must be conventional steel leaf springs. In order for the StableLoad to engage and disengage with minimal effort, a minimum gap of 1/8. To engage or. dis-engage weight may need to be take off springs if multiple wedges are used.
- Will not work with factory installed airbags. This is due to the lack of both upper and lower overload springs.
Auxiliary Battery Storage
There are no fits available.Please use our contact form and let us know!