When you're towing a trailer or hauling heavy loads, your truck's suspension faces tremendous stress. The result? Dangerous side-to-side sway, uncomfortable body roll, increased stopping distances, and a ride that can wear you out on long trips. While the aftermarket is flooded with suspension products promising solutions, most come with significant drawbacks that can make your driving experience worse.
The Torklift International StableLoad takes a different approach. It's the lowest cost, most effective suspension upgrade available, and it works with your factory suspension rather than against it.
Real-World Performance: The Difference is Dramatic
To demonstrate the StableLoad's effectiveness, Torklift conducted a real-world test using a half-ton Chevy truck loaded with 2,500 pounds in the bed. A professional driver attempted to navigate a track set up with traffic cones under two conditions.
Without StableLoad: The driver was unable to complete the course due to severe side-to-side sway and poor handling. The truck sagged significantly in the rear, creating dangerous driving conditions.
With StableLoad Engaged: The driver completed the course with nearly zero side-to-side sway. The handling problems were resolved, allowing the driver to manage sharp turns without fear of losing the load or control of the vehicle. The truck returned to a leveled ride height.
The installation and engagement process was simple. All it took was a ratchet to turn the StableLoad inward to take up the gap between the overloads.
A Customer's Perspective: From Skeptic to Believer
Doug Karr from Northwood Manufacturing, home of the Arctic Fox truck campers, shares his experience with StableLoad. Before discovering the product, he relied exclusively on airbags.
"The airbags were fine to a point, but the problem is the side-to-side movement, especially in wind. The airbags just couldn't compensate for that," Carr explains. "When they first sent me a set of StableLoad, I kind of looked at them funny."
After installation, his skepticism vanished. The results spoke for themselves:
- Side-to-side movement reduced by approximately 80%
- Handling improved incredibly
- Camper no longer rocks back and forth when pulling out of gas stations
- Movement in high winds greatly reduced
"It's the most inexpensive thing I've ever put for a setup on my truck. For the handling and the durability and overall usage, it's mind-boggling," Karr says.
How StableLoad Compares to Other Suspension Products
When your truck suspension is under heavy loads, hitting a pothole, speed bump, or turning corners results in bouncing, bucking, and severe side-to-side sway with increased body roll. You can also significantly increase your stopping distance if you're not properly equipped.
Many suspension products claim to fix these problems, including airbags, sway bars, shocks, and leaf springs. While they can help treat individual problems, these products leave you with negative side effects.
Airbags
What They Do: Airbags inflate with air pressure to lift the truck frame away from the axle to help level your ride.
The Problem: People generally run 70 to 80 pounds of air pressure in their airbags to level their vehicle. This will stiffen the ride, increase body roll and sway, and there's a potential for them to leak.
Sway Bars
What They Do: Sway bars connect the truck frame to the axle to help reduce body roll and sway.
The Problem: Sway bars will stiffen your vehicle suspension and cause an uncomfortable ride.
Shocks
What They Do: Shocks act as a dampener by resisting movement between the body and the axle to help eliminate roll and sway.
The Problem: Shocks will stiffen the ride and there's a potential for leaks.
Leaf Springs
What They Do: Leaf springs help increase the spring rate of your factory springs and reduce sag and sway.
The Problem: Leaf springs will significantly stiffen the suspension, causing a harsh ride.
The StableLoad Solution
The StableLoad does everything all of these other products do, but as a single product combined into one without the negative side effects. StableLoad treats the underlying ailment of your suspension problem by working with your factory suspension rather than against it.
How StableLoad Works
The StableLoad is customized to an exact fit to take up the space between lower overloads while the vehicle is under load. This puts the factory suspension back into use, exactly how the vehicle factory engineers intended.
The system allows the weight of the load to be equally dispersed throughout the overloads, making them engage faster and work at 100% of their capacity.
The Benefits:
- Prevents side-to-side sway and body roll
- Dramatically reduces stopping distance
- Improves vehicle handling
- Levels your ride, keeping headlights level at night to avoid blinding oncoming traffic
- Reduces wear and tear on your vehicle
- Provides a much more comfortable ride for stress-free travel
- Virtually eliminates the typical bouncing and bucking from driving over potholes and speed bumps
- Eliminates the feeling of the truck leaning side to side when going around corners
- Decreases stopping distance and prevents the vehicle from lurching forward under heavy deceleration
Installation: Easier Than You Think
The StableLoad installation is remarkably simple. According to the Truck U team, who featured the product on their show, the installation rates as a one on a scale of one to ten for difficulty.
Most applications are no-drill and bolt right into place. For situations where drilling is required, Torklift provides the drill bit you need along with free drill tool rental. The entire process goes in quickly, and the StableLoad engages or disengages when no longer needed.
How It Works:
When you have no load in the truck, you disengage the StableLoad and you have your factory suspension settings. Before you load down your truck, you engage the StableLoad. This engages the overload spring to provide a stiff suspension in the back without sag or body roll, making your ride significantly better.
Industry Recognition and Media Coverage
The Torklift International StableLoad has won awards and has been featured in numerous respected publications:
- Trailer Life Magazine
- Truck Trends Magazine
- Pro Pickup Magazine
- Diesel World
- RV Pro
- Diesel Power
- Truck Camper Magazine
When the Truck U team needed a suspension fix for their GMC truck project, they turned to the StableLoad, calling it a "quick, inexpensive, easy fix" for heavy towing situations.
Wide Vehicle Compatibility
Torklift International offers StableLoad fits for:
- Heavy duty trucks
- Light duty trucks
- Vans
- Class B motorhomes
Whether you're towing or hauling, there's a StableLoad solution designed for your specific vehicle.
Made in America with Legendary Support
The StableLoad is proudly made in the USA and backed by Torklift's legendary lifetime warranty. This warranty not only covers the StableLoad itself but also extends to your factory leaf springs, providing exceptional peace of mind.
Why StableLoad is Different
The StableLoad is the only suspension product on the market that works with your factory suspension to alleviate side-to-side sway, body roll, and sag. Rather than fighting against your vehicle's engineered suspension system, it enhances it by ensuring your overload springs engage properly and work at full capacity.
This fundamental difference in approach eliminates the compromises inherent in other aftermarket suspension products. You don't have to choose between a level ride and comfort, or between reduced sway and a harsh driving experience. The StableLoad delivers all the benefits without the negative side effects.
Finding Your StableLoad Solution
To find a certified dealer near you and get the right StableLoad fit for your vehicle, visit torklift.com. With thousands of happy customers already experiencing the difference, the StableLoad represents an investment in safer, more comfortable towing and hauling.
Once you try it, you'll wonder why you bothered with other aftermarket suspension products in the first place.
Frequently Asked Questions
What is the Torklift StableLoad?
The StableLoad is a suspension stabilizer that works with your factory suspension to reduce sway, body roll, and sag when towing or hauling. It's customized to fit between your overloads, allowing them to engage faster and work at 100% capacity.
How does StableLoad compare to airbags?
Unlike airbags, which require 70 to 80 pounds of air pressure and can stiffen the ride while increasing body roll and sway, the StableLoad works with your factory suspension without negative side effects. It also eliminates the potential for leaks that airbags present.
Is StableLoad difficult to install?
No. The installation is rated as a one on a scale of one to ten for difficulty. Most applications are no-drill and bolt right into place. The system engages and disengages in seconds using just a ratchet.
What vehicles does StableLoad fit?
StableLoad is available for heavy duty trucks, light duty trucks, vans, and Class B motorhomes. Torklift offers customized fits for a wide range of vehicles.
Do I need to keep StableLoad engaged all the time?
No. When you have no load in the truck, you disengage the StableLoad to maintain your factory suspension settings. You engage it before loading down your truck for towing or hauling.
What warranty does StableLoad come with?
The StableLoad is backed by Torklift's legendary lifetime warranty, which also extends to the factory leaf springs.
Will StableLoad stiffen my ride like other suspension products?
No. Unlike airbags, sway bars, shocks, and aftermarket leaf springs, the StableLoad does not stiffen your ride. It works with your factory suspension to provide benefits without the harsh ride quality associated with other products.
How much does StableLoad reduce side-to-side sway?
In real-world testing with a professional driver and 2,500 pounds of load, the StableLoad reduced side-to-side sway to nearly zero. Customer Doug Carr reported approximately 80% reduction in side-to-side movement.
Where is StableLoad manufactured?
The StableLoad is proudly made in the USA.
How do I find the right StableLoad for my vehicle?
Visit torklift.com to find a certified dealer near you who can help you select the correct StableLoad fit for your specific vehicle.