Installation Disclaimer: This blog is intended as a general reference only. It may not include every step, tool, torque specification, or vehicle-specific detail needed for your installation. Always refer to the official installation instructions included with your product for the complete procedure, required tools, torque values, safety information, and fitment details.
Why Choose Torklift Tie Downs for Your Ram Truck
When it comes to securing a slide-in camper to your Dodge/Ram 2500 or 3500, choosing the right tie-down system makes all the difference. Be sure to use Torklift’s Fit Finder to confirm the exact fitment for your year, make and model. Torklift camper tie-downs (part number D2115) are engineered to bolt directly to your truck's frame, creating the strongest mounting option possible for your slide camper.
These tie-downs are built to last. Made in the USA with a lifetime warranty, they feature a durable powder-coated finish that stands up to the elements and years of use. When you invest in Torklift, you're investing in quality hardware designed specifically for heavy-duty applications.
What You'll Need
Before starting your installation, gather the following components that come with your Torklift tie-down kit:
- Tie-down receivers (driver and passenger side)
- Bolt fishers
- Bolts, star washers, and plate washers (1x3)
- Washers, lock washers, and nuts
- Spacer plates
- Tie-down inserts
- 1/4-inch pin
Driver Side Installation
Step 1: Remove the Factory Bed Bolt
Begin your installation on the driver's side of your truck. Locate and remove the upper factory bed bolt. This bolt will be reinstalled later in the process.
Step 2: Prepare the Frame Bolts
Locate the two holes on the side of the frame. You'll use these access points to install the frame-mounted bolts that secure your tie-down receiver.
Using the provided bolt fisher, attach a bolt, star washer, and 1x3 plate washer. Insert this assembly into the large hole on the frame, then pull it straight back out through the smaller hole so the bolt protrudes from the frame. This fishing technique allows you to position hardware inside the frame where you can't reach directly.
Step 3: Position the Tie-Down Receiver
Lift the driver side tie-down receiver into place. Thread the bolt fishers through their corresponding holes in the receiver. This temporarily holds everything in position while you secure the hardware.
Step 4: Secure the Frame Bolts
Remove the bolt fishers once the receiver is properly aligned. Secure each bolt with a washer, lock washer, and nut. Don't fully tighten yet.
Step 5: Install the Spacer and Bed Bolt
Take the spacer plate and sandwich it between the tie-down strap and the bed crossmember. Reinstall the factory bed bolt you removed in Step 1, threading it through both the tie-down and the spacer.
Step 6: Torque All Hardware
Proper torque sequence ensures even pressure and a secure installation. Start by torquing down the bed bolt, followed by the two frame bolts.
Passenger Side Installation
Once the driver side is complete, repeat all the steps above to install the passenger side tie-down. The process is identical:
- Remove the upper factory bed bolt
- Use the bolt fisher to position frame bolts through the frame holes
- Lift the passenger side receiver into place
- Remove bolt fishers and secure with washers, lock washers, and nuts
- Install the spacer plate and reinstall the bed bolt
- Torque the bed bolt first, then the frame bolts
Using Your Torklift Tie Downs
After installation is complete, using your new tie-down system is straightforward. When you're ready to secure your camper, simply slide a tie-down insert into the receiver and secure it with the provided 1/4-inch pin.
This receiver-style design gives you flexibility. The inserts can be removed when not in use, keeping a clean profile on your truck bed.
Important Installation Notes
This guide provides a reference for the installation process. Torklift regularly updates their installation instructions to reflect the latest specifications and procedures. Always refer to the official instructions included with your product for the most current information.
The frame-mounted design of these tie-downs creates the strongest possible connection between your camper and truck. By bolting directly to the frame rather than relying on bed-only mounting points, you're distributing the load to the most robust part of your vehicle's structure.
Need Help?
If you have questions about your Torklift tie-down installation or need technical support, contact Torklift directly at 800-246-8132 or visit their website for additional resources.
Frequently Asked Questions
What Ram trucks are compatible with part number D2115? These Torklift tie-downs are designed for 2010-2012 Ram 2500 and 3500 trucks with 8’ bed length. Use Torklift’s Fit Finder to confirm your tie down fitment.
Do these tie downs come with a warranty? Yes, Torklift tie-downs are backed by a lifetime warranty.
Where are Torklift tie-downs manufactured? These tie-downs are made in the USA.
How do the tie downs attach to the truck? They bolt directly to your truck's frame.
What is the bolt fisher used for? The bolt fisher is a tool that helps you feed bolts through the frame holes where you cannot reach directly by hand.
Can I remove the tie down inserts when not in use? Yes, the inserts slide into the receiver and are secured with a 1/4-inch pin, making them easy to remove when you're not hauling a camper.
Where can I find the most current installation instructions? Always refer to the official instructions included with your Torklift product, as they are updated regularly. You can also contact Torklift at 800-246-8132.