Installation Disclaimer: This blog is intended as a general reference only. It may not include every step, tool, torque specification, or vehicle-specific detail needed for your installation. Always refer to the official installation instructions included with your product for the complete procedure, required tools, torque values, safety information, and fitment details.
Installing rear tie downs on your Dodge/RAM 2500 is a straightforward process that enhances your truck's cargo-securing capabilities. The Torklift D3113 rear tie downs integrate seamlessly with your vehicle's existing frame, providing reliable anchor points for hauling equipment, securing loads, or towing applications.
This guide walks you through the installation process, helping you understand what to expect when adding these essential accessories to your truck.
What You'll Need
Before beginning the installation, gather the following:
- The three factory bolts you'll remove during installation (these will be reused)
- Hardware provided with your Torklift D3113 kit
- Appropriate tools for removing and installing bolts
- Torque wrench for proper tightening specifications
Step 1: Remove the Factory Bolts
Start by locating the three factory bolts on your Dodge/RAM 2500's frame. These bolts are positioned where the tie downs will mount.
Remove all three factory bolts and set them aside in a safe location. You'll need these original bolts to complete the installation, so don't discard them.
Step 2: Align and Install the Tie Downs
With the factory bolts removed, you're ready to position the tie downs.
Align the tie downs with the proper mounting holes on your truck's frame. The tie downs are designed to fit precisely with your vehicle's existing bolt pattern.
Once aligned, reinstall the hardware. Use the factory bolts you removed in Step 1 to secure the tie downs in place.
Step 3: Install the Rear Portion of the Receiver
Move to the inside of the frame to complete the installation.
Install the rear portion of the receiver using the hardware provided in your Torklift kit. This component attaches directly to the frame and works in conjunction with the tie downs you've just mounted.
Secure all hardware to the frame according to the installation instructions.
Step 4: Torque to Specifications
After all components are in place, torque all bolts to the proper specifications. Proper torque is critical for ensuring the tie downs perform safely under load.
Refer to your official Torklift installation instructions for the exact torque values required for your specific application.
Step 5: Repeat on the Other Side
Complete the installation by repeating the entire process on the opposite side of your truck.
Once both sides are installed and properly torqued, your rear tie downs are ready to use.
Verifying Your Installation
After completing the installation on both sides, take a moment to verify that:
- All bolts are properly tightened to specification
- The tie downs are securely mounted with no movement
- All hardware is in place and properly seated
- Both sides are installed symmetrically
Frequently Asked Questions
How long does it take to install the D3113 rear tie downs?
The installation process is straightforward and can typically be completed in a reasonable timeframe once you have all the necessary tools and hardware ready.
Do I need to purchase additional hardware?
No. The installation uses your truck's original factory bolts along with the hardware provided in the Torklift kit.
Can I install these tie downs myself?
Yes. The installation process involves removing factory bolts, aligning the tie downs, and reinstalling hardware. However, always refer to the official installation instructions for complete details.
What torque specifications should I use?
Torque specifications are provided in the official installation instructions included with your product. Always refer to these instructions for the proper torque values.
Will these tie downs work with other Dodge/RAM models?
The D3113 is designed specifically for the Dodge/RAM 2500. For other models, contact Torklift at 800-246-8132 or visit torklift.com to confirm fitment.
Where can I get help if I have questions during installation?
For any questions about your Torklift products, visit torklift.com or call 800-246-8132 for assistance.
Why is it important to refer to the official instructions?
Torklift installation instructions are updated regularly to reflect the most current installation procedures, specifications, and safety information. Always consult the instructions included with your product for the most accurate guidance.