How much does a StableLoad cost?

StableLoad Cost Blog 1Torklift offers StableLoad kits at different prices depending on the application. Torklift has designed an upper overload StableLoad part #A7200 that costs $325.99, as well as two lower overload kits that vary in price. The lower overload kit part#A7310 is for vehicles with pre-drilled springs priced at $325.99. The second lower overload kit part #A7311 is for vehicles that do not have pre-drilled lower overload springs. This kit costs $349.99 because it comes with special drill bits. Each kit comes with a 30-day money back guarantee to ensure you are satisfied with your purchase.


What is the 30-day money back guarantee?

Torklift provides a 30-day money back guarantee on the StableLoads no matter where they were purchased. If you are not satisfied with your product in the first 30 days, with a receipt a full refund will be given. This is in place to ensure you are happy with your purchase.


StableLoad Cost Blog 2What is a StableLoad?

A StableLoad improves the vehicle’s handling by pre-activating the stabilizing effect that was designed for rear suspension by keeping them under load the way the manufacturer’s designed them to function. The quad contact design compliments the specific vehicle engineered suspension that the manufacturers invested millions of dollars developing so you would have a smooth and comfortable ride.

See what the guys from TruckU experienced when they installed the StableLoads: 

What’s included in each kit and why do you need it?

StableLoad: Upper Overload Part #A7200- $325.99 
This part is designed to replace inefficient factory overload bump stop pads, putting the upper load springs to work faster. This kit is quick and easy to install and requires no drilling with serious results. It’s installed by bolting each StableLoad onto each overload, replacing the bump stop pad. This kit fits any vehicle with an upper overload, and works the same regardless of the vehicle having or not having aftermarket air bags.

StableLoad Cost Blog 3StableLoad: Quick Disconnect (lower overload) Part #A7310 -$325.99 
It’s engineered for trucks, SUVs, vans, commercial applications and other vehicles equipped with lower overload springs that come with a pre-drilled hole in the end of the overload leaf spring. This kit is simple and has a quick installation time. 

StableLoad: Quick Disconnect (lower overload) Part #A7311- $349.99 
It’s for universal applications with lower overload springs that are not pre-drilled. This kit comes with four cobalt drill bits and specific instructions for drilling. Click here to learn how to drill a leaf spring in just 37 seconds with the StableLoad Drill Tool, available for rent.


Why does it cost $325.99 to $349.99? 
Each StableLoad kit Torklift designed is precision crafted in the USA with a lifetime warranty. Torklift is one of the last manufacturers still operating in the United States and will not be moving its factory overseas like many other truck accessory manufacturers have. Torklift’s Legendary Lifetime Warranty comes standard with this product, where most other manufacturers only provide a warranty ranging from 30 days to one year. That means if you have an issue, we are going to take care of you without making you jump through hoops.

Click here to learn more about Torklift StableLoads for truck suspension. Feel free to email our Tech Support at: support at torklift.com or call 800.246.8132 if you have any questions.

 

shyannWritten by Shyann Guerra:
Being in an environment in which I can problem solve is where I flourish. Every answer to a problem leads me to a new concept to understand or a lesson to learn. Whem I'm not solving problems I enjoy camping and going to festivals with my family - from the local city center festivals to the mountains of Wenatchee at the Winter Grass, blue grass music festival. Experiencing culture is where my heart is content. 

 

Continue reading
1912 Hits
0 Comments

What is the best aftermarket suspension for my truck?

TLI SL Blog 1Once you start to tow or haul with your truck, pressure is applied on the factory overload springs of your vehicle’s suspension. The leaf springs on your vehicle are designed as a spring pack with upper and lower overload leaf springs. When the vehicle is loaded the spring pack engages. The problem here is that there isn’t enough stability to support the load, giving you scary handling characteristics.

Just a few you may have experienced:

- Side-to-Side Sway
- Body Roll
- Porpoising
- Truck Sag (This has a multitude of negative effects on your vehicle)

With lack of control you’ll find yourself gripping your steering wheel hard. The key to getting the stability you need is harnessing the power within the much thicker, much stronger overload leaf springs. Activating the overload leaf springs gives you increased stability and handling while towing or hauling. How can you access this extra power? That’s where the StableLoads save the day! Torklift’s StableLoads fill the gap between the leaf spring pack and the overload leaf springs, pre-activating the stabilizing affects already built into your truck’s suspension.

There are many suspension products on the market that you could consider. But how do you know what product you need? If you’re experiencing more than one symptom, the StableLoad tackles all of the handling issues, instead of many of other products that just address one.

TLI SL Blog 2

Let’s explore the options for upgrading truck suspension:

 

ShocksTLI SL Blog 3
A shock is a mechanical or hydraulic device designed to absorb and damper shock impulses. It does this by converting the kinetic energy of the shock into heat which is then dissipated. Some shock absorbers allow tuning of the ride by control of the valve by manually adjusting the shock absorber. Manufacture’s say that shocks typically need to be replaced at 50,000 miles.

Pros
• Suspension is adjustable
• Allows you to firm suspension while towing
Cons
• Shocks are expensive
• Maintenance is even more expensive
• Only solves one of many suspension problems you may be facing
• No lifetime warranty

TLI SL Blog 4


Airbags
Airbags are a type of vehicle suspension powered by an electric compressor. The compressor then pumps air into a flexible bellow that is typically made from textile-reinforced rubber. The air pressure will then inflate the bellows and raise the chassis from the axle. Air bags feature adjustable suspension, but usually need to be replaced between 50,000 and 70,000 miles and the price is high.

Pros
• The ability to lift/level a vehicle for towing
Cons
• Both initial purchase and maintenance is expensive
• With airbags you are reduced to two points of contact instead of four like the vehicle manufacturer intended
• Airbags are notorious for leaking problems – preventing them from holding air
• Only solves one of many suspension problems you may be facing
• No lifetime warranty

TLI SL Blog 5


Bump stops
Bump stops are a compressed suspension component that is designed to prevent metal on metal contact that leads to damage or unsafe driving characteristics. As the suspension undergoes high compression such as hitting a speed bump or dipping into a pothole, the bump stop soaks up the shock. They can easily be shaped with common machining processes, but the downside is that they dissipate energy into the suspension which can actually cause your shocks to work harder, and they take longer to engage.

Pros
• Prevents metal on metal contact
• Absorbs jolts and bumps
Cons
• Bump stops take longer to engage
• Energy is dissipated into the suspension causing your shocks to work harder
• Only solves one of many suspension problems you may be facing
• No lifetime warranty

TLI SL Blog 6


Sway bars
Sway bars help reduce the body roll of a vehicle during fast cornering or irregularities in the road. It connects the opposite wheels together through short lever arms linked by a torsion spring. Over time the sway bar link ball joints wear out and they will need to be replaced.

Pros
• Reduces body roll
Cons
• Increased weight transfer to already overloaded outside tires (reducing traction)
• Can cause cracked mounts
• Stiffens suspension contributing to a rougher ride
• Only solves one of many suspension problems you may be facing
• No lifetime warranty

Let’s turn to science to see which suspension upgrade is most effective:

For this test an inclinometer is used to measure horizontal and vertical tilt. The higher the horizontal and vertical tilt register on the inclinometer the less control the driver has over the vehicle.

 

TLI SL Blog 7Why is the StableLoad the clear winner?
Unlike any other aftermarket suspension upgrade, StableLoads have a quad contact design while other rear suspension products reduce contact to only two points. With the StableLoads, see and feel a dramatic reduction in side-to-side sway, body roll. The StableLoads keep your vehicle level reducing stopping distance, suspension and tire wear. This creates for comfortable and stress free travel. It’s also the only suspension upgrade you can turn on and off with the lower leaf spring design. Click here to learn more about how to engage and disengage the StableLoads in seconds so you can return to your smooth, factory ride when not towing or hauling. 

TLI SL Blog 8

Pros
• Dramatically improves safety and handling while towing and hauling
• Reduces negative vehicle handling characteristics like side-to-side sway, body roll and porpoising 
• Eliminates sag and levels your ride 
• Ability to turn on and off in seconds*
• Quad contact design complements the vehicle’s specially engineered suspension that automotive manufacturers have invested millions of dollars designing, while all other rear suspension products reduce contact to only two points  
• Enhances airbag performance by lowering airbag overload air pressure and activating the factory overloads
• Legendary Lifetime Warranty includes coverage for the vehicle factory leaf springs
• Proudly made in the USA

*Applies only to the StableLoad Quick Disconnect (Lower Overload).

Many suspension upgrades come with just a limited warranty, but the StableLoads come with our Legendary Lifetime Warranty that not only covers the StableLoads but also covers the vehicle’s factory leaf springs. We do this because we stand behind our product 100 percent.

NEW: 30 Day Money Back Guarantee!

Torklift provides a 30-day money back guarantee on the StableLoads no matter where they were purchased. If you are not satisfied with your product in the first 30 days, with a receipt a full refund will be given. This is in place to ensure you are happy with your purchase.

 

Click here for more information on our StableLoad suspension kits, contact us by emailing Tech Support at: support at torklift.com or by calling 800.246.8132.

 

shyannWritten by Shyann Guerra:
Being in an environment in which I can problem solve is where I flourish. Every answer to a problem leads me to a new concept to understand or a lesson to learn. When I'm not solving problems I enjoy camping and going to festivals with my family - from the local city center festivals to the mountains of Wenatchee at the Winter Grass, blue grass music festival. Experiencing culture is where my heart is content. 

 

'

Continue reading
4493 Hits
0 Comments

Finding the best suspension options for your vehicle

When it comes to suspension, Torklift International understands the dynamics of how your vehicle will handle the load of hauling a truck camper or towing an RV trailer. As a simple and most effective way to upgrade your truck’s suspension, Torklift’s StableLoad suspension stabilizer should be the first approach to remedy any poor vehicle handling caused by suspension issues you’ve experienced.

b2ap3_thumbnail_takebackcontrol.png

Your vehicle manufacturer factory installed overload leaf springs on your vehicle’s suspension are designed to help with extra payload or towing when the truck is loaded down. There are two applications of StableLoads; the upper and lower application. The lower StableLoad attaches to the lower overload leaf spring while the upper attaches above the upper leaf spring onto its factory engineered “bump stop.”

b2ap3_thumbnail_factory_bumpstop.png

A bump stop on the upper overload leaf spring is meant to activate the effects of the overload leaf spring, allowing the suspension to perform more effectively.  Be sure to read our detailed article post if you're interested in learning more about how leaf springs work.

 b2ap3_thumbnail_StableLoad_Upper.png
StableLoad Suspension Stabilizer
(upper application, shown in yellow for contrast)

The Torklift International upper overload application is designed to replace the smaller, inefficient factory overload bump stop pads, putting the upper overload springs to work sooner.  It stabilizes the vehicle suspension having a significantly positive impact on safety for its passengers and cargo.

RV enthusiasts who are out on the road and experiencing poor vehicle handling issues firsthand often participate in conversations online. This past summer, we noticed an online post regarding an ineffective “bump stop.”

Unlike the Torklift International suspension modification, this style of “bump stop” had several spaces, presumably to absorb and cushion once in contact with the leaf spring. Instead of properly engaging the leaf spring, the bump stop simply collapsed under the load.

b2ap3_thumbnail_bumpstop_fail.png

This design proved ineffective at supporting the leaf spring. Because it did not engage the leaf spring to its full potential, the stabilizing benefit was significantly lacking.

We turned to Clint Jackson of Fox Island, Wash., for some insight on his experience with the bump stop style shown above in comparison to the Torklift upper StableLoad. Once switching to the Torklift StableLoad upper application, Clint mentions how his truck’s overload engaged much sooner than the style he was previously using.

Clint writes, “The StableLoads were a quick add-on for great performance. They are a quality product and are super easy to install.”

Rather than wasting time and money on an ineffective product, he wished he had invested in the StableLoad design to begin with.

Torklift StableLoads bolt to each of the vehicle’s overload frame bump stop pads without drilling. As a set of four for both front and back (vehicle and passenger sides), the specially engineered and proprietary dense polyurethane design proves to be extraordinarily durable and carries a lifetime warranty. For a dramatic improvement in vehicle handling stability, choose the Torklift upper StableLoads as an enhancement for your factory bump stops.

b2ap3_thumbnail_SL_Product_Box_OU.png

As the best suspension upgrade for towing or hauling, the combination of upper and lower StableLoads can solve significant poor vehicle handling performance issues and help eliminate any negative side effects.

b2ap3_thumbnail_StableLoad_Power.png

Each precision crafted StableLoad stabilizer kit carries our Legendary Lifetime Warranty. Click here to learn more about the StableLoad suspension upgrade.

Source: https://www.rv.net/forum/index.cfm/fuseaction/thread/tid/27838438.cfm

Continue reading
2250 Hits
0 Comments

Follow Blog Via Email