Science behind the StableLoad Suspension Stabilizer
Have you ever watched the TV show Mythbusters on the Discovery Channel? One of the oldest and most popular television shows on Discovery, the television series tests validity of rumors and myths by applying scientific method. With their experiments, the ultimate truth is exposed and common myths are debunked.
In an effort to reveal the capabilities of Torklift International StableLoad suspension upgrade we too, turned to science. In our own version of Mythbusters, we conducted a series of tests to address an important question:
Do suspension upgrades actually work?
We loaded a 2015 Ford F150 truck with 2,800 pounds to simulate significant payload. For an in-depth assessment, the loaded Ford truck is tested through three different variables that replicate common handling issues.
- Large pot hole = side-to-side sway
- Speed bump = porpoising (front-to-back motion)
- Cornering = body roll
To measure degrees of movement, an inclinometer was mounted to the Ford F-150 truck. The inclinometer measures horizontal and vertical tilt.
The Ford truck was driven through the course to uncover the best and most effective suspension upgrade for your vehicle. To set a baseline, we recorded measurements of the factory suspension with no suspension upgrades. Second, we installed airbags at 100-psi air pressure. Finally, we put the StableLoad Suspension Stabilizer to the test.
The results may surprise you.
Take a look:
The outcome of our test relied on science to prove StableLoads as the clear winner. Torklift’s version of Mythbusters showed that suspension upgrades actually do work, and that StableLoads have the greatest affect on handling characteristics of a vehicle when it comes to side-to-side sway, porpoising and body roll. If you often use your truck to haul or tow heavy payload, the StableLoads should be the first suspension modification to consider.
What makes StableLoads so effective? It’s simple.
By pre-activating the strength within factory leaf spring suspension, the StableLoads tap into the overload leaf springs for extra support when towing or hauling heavy payload like a truck camper, fifth wheel, or any type of trailer.
The use of precision laser-crafted wedge plates that fill the space between the factory leaf spring pack and overload leaf spring triggers support from the vehicle’s suspension. The power of the factory suspension is initiated and put to maximum use.
Applicable to any truck, van, SUV or small commercial vehicles with factory overload leaf springs, the StableLoads are the only suspension modification that quickly turn on and off based on your preference. If you use your vehicle as a daily driver, simply switch off the lower quick-disconnect StableLoads and enjoy its smooth factory ride.
StableLoad Drill Tool to help. Using specialty cobalt drill bits and a household cordless drill, each leaf spring can be drilled in less than 37 seconds.StableLoads are also easy to install and most applications bolt on without any need for drilling. In the rare case your vehicle does not have the half-inch hole pre-drilled by the vehicle manufacturer, don’t stress. Our engineers have designed the
Recently we’ve heard another question arise on the rumor circuit.
Will drilling into a leaf spring cause the spring to split or crack?
Due to the properties of hardened spring steel as a tempered alloy of iron, the thickness and strength of the leaf spring cannot be split or cracked. In fact, a specific technique must be used in order to drill through the spring successfully.
The spring cannot be cracked because of the following factors:
- The area on the lower overload leaf spring where the StableLoad installs is a relatively low stress area.
- The hole drilled is a radius as opposed to a square shape. The corners of a square cut would have heightened stress, causing potential for cracks to form. The round hole avoids stress risers, eliminating possibilities of splitting a spring.
Lastly, keep in mind that most vehicle manufactures are putting holes in the factory springs. If that isn't enough to give you peace of mind, Torklift International guarantees not just the Stableloads with our Legendary Lifetime Warranty, but we also cover your leaf springs. If you have any questions in regards to drilling leaf springs, call our Tech Support team at 800-246-8132.
In conclusion, the results of the StableLoad Test provided significant insight as to how suspension upgrades can help your vehicle handle payload more effectively.
In comparison to airbags, the StableLoads performed 30 percent better when it comes to side-to-side sway, front-to-back motion or porpoising is reduced by 20 percent, and body roll showed 10 percent improvement.
By using the inclinometer to measure and analyze vehicle movement, science proves that suspension upgrades greatly impact vehicle handling.
Click here to learn more about the StableLoad Suspension Stabilizer.